Filter
Top Products
12
IMPORTANT NOTES
(continued)
***
●
Do not remove the SD memory card while the CD-2e is
powered up. Doing so may damage the data stored on
the SD memory card.
704
●
Carefully insert the SD memory card all the way in—until
it is firmly in place.
fig.M512-Insert.eps
705
●
Never touch the terminals of the SD memory card. Also,
avoid getting the terminals dirty.
708
●
SD memory cards are constructed using precision
components; handle the cards carefully, paying particular
note to the following.
❍
To prevent damage to the cards from static electricity,
be sure to discharge any static electricity from your
own body before handling the cards.
❍
Do not touch or allow metal to come into contact with
the contact portion of the cards.
❍
Do not bend, drop, or subject cards to strong shock or
vibration.
❍
Do not keep cards in direct sunlight, in closed vehicles,
or other such locations (storage temperature: -25 to
85˚ C).
❍
Do not allow cards to become wet.
❍
Do not disassemble or modify the cards.
***
●
Please read the documentation that is included with your
memory cards.
●
Install the unit on a solid, level surface in an area free from
vibration.
***
●
Never use the emergency eject hole to open the disc tray
while the this unit is operating.
***
●
Remove any disc from the drive before powering up or
down.
***
●
To avoid the risk of malfunction and/or damage, insert
only discs with into the CD-R/RW drive. Never
insert any other type of disc. Avoid getting paper clips,
coins, or any other foreign objects inside the drive.
***
●
Don’t use unusually shaped discs, such as heart-shaped or
octagonal discs. Doing so may damage the CD-2e.
●
Do not bend the disc.
***
●
Do not drop or stack discs.
***
●
Do not place heavy objects on a disc, or subject it to
strong physical shock.
(801change)
●
Hold a disc by inserting a finger in the center hole and
pressing your thumb against the outer edge. Be careful
not to get fingerprints on, or scratch the recording surface
of, the disc (the green surface).
***
●
Do not use in dusty areas.
***
●
Do not leave the disc in direct sunlight or an enclosed
vehicle.
***
●
Do not keep the disc in the CD-R/RW drive for a long
time.
***
●
To protect the disc, keep it in its original case.
***
●
Do not use CDs that have a CD label or sticker affixed to
them. You may be unable to remove the CD, or it may
cause the CD-2e to malfunction.
***
●
When writing a title on the label surface of the disc, use a
soft-tipped writing implement such as a felt pen.
***
●
Wipe the disc with a soft and dry cloth radially from inside
to outside. Do not wipe along the circumference.
***
●
Keep your discs clean using a commercially available CD
cleaner. Do not use benzine, record cleaner spray or
solvents of any kind.
***
●
Please read the documentation that is included with your
CD-R/RW discs.
Handling SD memory cards
Handling the CD-R/RW drive
Handling CD-R/RW Discs
CD-2e_e.book 12 ページ ２００７年９月１０日 月曜日 午後８時５７分