Filter
Top Products
78
Other Functions and Settings (continued)
More Functions
When you’re using mics as well as instruments connected to
the LINE IN jacks, you may want to temporarily use only the
mics.
If so, you can turn off the line input. Sound will no longer be
input from the LINE IN jacks, and only the sound from the
mics will be heard.
1
Press until “LINE IN” appears in the
display, and then press .
• You can also select this item by turning [DATA].
The following screen appears.
2
Turn to select “Off.”
• Sound will no longer be input via the LINE IN jacks.
3
Press twice.
You’re returned to the previous readout.
MEMO
• The “Off” setting is temporary, and will be cleared when
you turn off the power. It will automatically be turned
“On” the next time you turn on the power.
You can assign titles to the tracks on a CF card ( Page 59).
If you want to view the track titles, use the following
procedure.
MEMO
• For wave files (WAV format) written by a computer to a
CF card ( Page 45), the filename is the track title.
1
Press until “Show Track Title” appears
in the display, and then press .
• You can also select this item by turning [DATA].
The following screen appears.
2
Turn to select “On.”
3
Press twice.
You’re returned to the previous readout.
Subsequently, when you switch tracks on the CF card,
the track title will be shown briefly, and then the time
display will reappear.
If the title is so long that it cannot be displayed at one
time, it will scroll to display additional characters (up
to the first 27).
Switching the Line Input On/Off Viewing the Track Titles
on a CF Card