Roland CD-2 CD Player User Manual


 
7
IMPORTANT NOTES
Checking and Preparations
704
Carefully insert the CompactFlash card all the way in—
until it is firmly in place.
fig.M512-Insert
705
Never touch the terminals of the CompactFlash card. Also,
avoid getting the terminals dirty.
707
This unit’s memory card slot accepts the CompactFlash
card. Microdrive storage media are not compatible.
708
CompactFlash cards are constructed using precision
components; handle the cards carefully, paying particular
note to the following.
- To prevent damage to the cards from static electricity,
be sure to discharge any static electricity from your
own body before handling the cards.
- Do not touch or allow metal to come into contact with
the contact portion of the cards.
- Do not bend, drop, or subject cards to strong shock or
vibration.
- Do not keep cards in direct sunlight, in closed vehicles,
or other such locations (storage temperature: -25 to 85˚
C).
- Do not allow cards to become wet.
- Do not disassemble or modify the cards.
***
Install the unit on a solid, level surface in an area free from
vibration.
***
Never use the emergency eject hole to open the disc tray
while the this unit is operating.
***
Remove any disc from the drive before powering up or
down.
***
When you carry this unit, remove the disc from the
loading tray.
***
To avoid the risk of malfunction and/or damage, insert
only discs with into the CD-R/RW drive. Never
insert any other type of disc. Avoid getting paper clips,
coins, or any other foreign objects inside the drive.
***
DO NOT play a CD-R/RW disc (CD-R/RW disc on which
track data from a CompactFlash card has been backed up
Page 71) on a conventional audio CD player. The
resulting sound may be of a level that could cause
permanent hearing loss. Damage to speakers or other
system components may result.
***
Don’t use unusually shaped discs, such as heart-shaped or
octagonal discs. Doing so may damage the CD-2.
Do not bend the disc.
***
Do not drop or stack discs.
***
Do not place heavy objects on a disc, or subject it to strong
physical shock.
(801change)
Hold a disc by inserting a finger in the center hole and
pressing your thumb against the outer edge. Be careful not
to get fingerprints on, or scratch the recording surface of
the disc (the green surface).
***
Do not use in dusty areas.
***
Do not leave the disc in direct sunlight or an enclosed
vehicle.
***
Do not keep the disc in the CD-R/RW drive for a long
time.
***
To protect the disc, keep it in its original case.
***
Do not put a sticker on the label of the disc.
***
When writing a title on the label surface of the disc, use a
soft-tipped writing implement such as a felt pen.
***
Wipe the disc with a soft and dry cloth radially from
inside to outside. Do not wipe along circumference.
(801change)
Keep your discs clean using a commercially available CD
cleaner. Do not use benzine, record cleaner spray or
solvents of any kind.
***
Please read the documentation that is included with your
CD-R/RW discs.
Handling CompactFlash Cards
Handling the CD-R/RW Drive
Handling CD-R/RW Discs