Filter
Top Products
Tuning Your Instrument (Tuner Function)
(continued)
87
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
2
Use the [+] [-] buttons to adjust the reference pitch as desired.
fig.menu-tuner06-e.eps
3
Press the [EXIT] button twice.
You’re returned to the audio source screen.
As a tuning aid, you can have the CD-2i sound a guide tone from the internal speakers.
1
Press the [MENU] button to access the menu screen, and choose “Tuner/
Tone?”
fig.menu-tuner01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Tuner/Tone?”
Press the [ENTER] button to confirm your choice.
2
While the tuner screen is displayed, press the [ENTER] button.
(The tuner screen and the guide tone screen will alternate each time you press the
[ENTER] button.)
fig.menu-tuner05-e.eps
You’ll hear the guide tone shown in the screen.
3
Use the [+] [-] buttons to select the name of the note you want to use as
the guide tone.
4
Tune your instrument to the guide tone.
5
To stop the guide tone, press the [EXIT] button twice.
You’re returned to the audio source screen.
Value (units: Hz)
Explanation
435–440 (factory setting)–445
Decreasing this value will lower the pitch. Increasing this value
will raise the pitch.
Listening to a Guide Tone While Tuning
Value Explanation
A3–A4 (factory setting)–A5
You can choose one of 25 chromatic notes in the range A3–A5.
Reference pitch
Guide tone
The reference pitch for the guide tone can be adjusted in the Tuner screen (☞ Page 86).
Important
CD-2i_e.book 87 ページ ２０１０年３月１５日 月曜日 午前１０時１５分