Filter
Top Products
40
Recording Acoustic Instruments or Vocals
ig.intmic-e.eps
The internal mics are stereo mics. Sound picked up
by the mic on the left side of the CD-2i is recorded
on the left channel (L), while sound from the mic on
the right side is recorded on the right channel (R).
4
If you want to listen to the recorded audio while you record, connect
headphones to the PHONES jack located on the side of the CD-2i.
The sound received by the internal mics will not be heard from the internal speakers.
You’ll need to use headphones if you want to monitor the sound being recorded. Use
the [VOLUME] knob to adjust the headphone volume.
fig.connect-headphone-e.eps
Recording with the Internal Mics
If You’re Recording to an SD
Memory Card
If You’re Recording to a
CD-R/RW Disc
1
Turn on the power
(
☞
Page 21, 23).
1
Turn on the power
(
☞
Page 21).
2
Insert the SD memory card
(
☞
Page 25).
2
Insert the CD
(
☞
Page 28).
3
Set the audio source to “SD.”
Press the [SD CARD] button so it’s lit.
fig.selectCD-e.eps
3
Set the audio source to “CD.”
Press the [CD] button so it’s lit.
fig.selectSD-e.eps
Internal mic
(left channel)
Internal mic
(right channel)
Stereo mini type
Type of plug that can
be connected
CD-2i_e.book 40 ページ ２０１０年３月１５日 月曜日 午前１０時１５分