Filter
Top Products
13
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
Panel Descriptions
fig.unit01-e.eps
MIC L/MIC R
This is a stereo pair of mics built into the CD-2i. You
can use these mics to record.
☞
“Recording with the Internal Mics” (Page 40)
[MIC] Knob
This adjusts the input level of the internal mics and
the EXT MIC jack.
fig.mic-peak.eps
If the input sound is too loud, the PEAK
indicator above the [MIC] knob will light.
* If you turn the [MIC] knob all the way to the left, no
sound will be input from the internal mics or the EXT
MIC jack.
* If the [MIC LEVEL] switch is in the “AUTO” position
(Page 43), the input level will be set automatically, and
you won’t be able to adjust the input level using the
[MIC] knob.
☞
“Recording with the Internal Mics” (Page 40),
“Connecting an External Mic for Recording” (Page 44)
[LINE/PHONO] Knob
This adjusts the input level of the LINE/PHONO IN
jack.
fig.mic-peak.eps
If the input sound is too loud, the PEAK
indicator above the [LINE/PHONO] knob
will light.
* If you turn the [LINE/PHONO] knob all the way to the
left, no sound will be input from the LINE/PHONO IN
jacks.
☞
“Recording an Electronic Instrument” (Page 49),
“Recording a Cassette or MD” (Page 52)
[VOLUME] Knob
This knob adjusts the volume of the internal
speakers and the headphones.
☞
“Listening to a CD/Listening to an SD Memory Card”
(Page 72)
SD Card Slot
You can insert an SD memory card here.
☞
“Preparing an SD Memory Card” (Page 25)
[ ](Stop) Button
This button stops playback or recording.
☞
“Listening to a CD/Listening to an SD Memory Card”
(Page 72)
[ ](Play) Button
●
This button starts playback or recording.
●
During playback or recording, you can press this
button to pause. Press it once again to resume
playback or recording from the location at which
you paused.
●
If you pause recording, the next track will be
started at the point you resumed recording.
☞
“Listening to a CD/Listening to an SD Memory Card”
(Page 72)
[ ](Record) Button
●
Press this button to enter recording-standby
mode.
●
During recording, you can press this button to
assign a track number.
☞
“Press the [ ](Record) button to Assign a Song
number” (Page 66)
MODE Button
These buttons select the audio source. The selected
button will light.
Top Panel
[SD CARD]
button
Selects “SD memory card” as the audio
source.
[CD] button Selects “CD” as the audio source.
CD-2i_e.book 13 ページ ２０１０年３月１５日 月曜日 午前１０時１５分