Filter
Top Products
77
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
Changing the Key of the Playback
This adjusts the key (pitch) of the playback sound in semitone steps. This can be useful
in situations like the following.
• You want to practice flute along with an accompaniment CD that was created for alto sax.
• You want to sing along with a karaoke CD at a key that’s easier for you to sing.
1
Press the [KEY] button to access the menu screen, and choose “Key.”
The setting will turn on/off each time you press the [KEY] button.
* Whenever the unit has remained inactive for a predetermined amount of time, it will go back to
displaying the Source (Sound Source) screen.
fig.menu-key01-e.eps
Press the [KEY] button to access the menu screen.
Use the [ ] buttons to choose “Key.”
2
Use the [+] [-] buttons to adjust the value, changing the key.
If you press the [
ENTER
] button, the value will return to “0.”
fig.menu-key02-e.eps
3
Press the [EXIT] button.
You’re returned to the audio source screen.
When you turn off the power, the Key setting will return to “Off.”
Value
Explanation
-6–0 (factory setting)–+5
Decreasing the value by one will lower the overall pitch of the
song by a semitone. Increasing the value by one will raise the
overall pitch of the song by a semitone. A setting of “0” is the
original key of the song.
* If you change the key setting during playback, the audio will
be interrupted momentarily.
Remote operations
Raises the key of the playback sound.
Lowers the key of the playback sound.
Turns the key setting on/off.
CD-2i_e.book 77 ページ ２０１０年３月１５日 月曜日 午前１０時１５分