Roland 5100013104-02 CD Player User Manual


 
Panel Descriptions
(continued)
17
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
[MIC LEVEL] Switch
This selects how the mic input level is to be
adjusted.
“Recording Acoustic Instruments or Vocals” (Page 40),
“Adjusting the Input Level Automatically (Auto Level
Function)” (Page 43)
LINE/PHONO IN Jacks
Connect an electronic piano, keyboard, cassette
deck, etc. to these jacks.
“Recording an Electronic Instrument” (Page 49),
“Recording a Cassette or MD” (Page 52)
LINE OUT Jack
Use this jack to output analog audio signals to an
external speaker system or electronic piano.
“Connecting External Speakers” (Page 126)
You can choose the audio signal that will be output
from the LINE OUT jack.
“Selecting the Audio Source that’s Sent from the LINE
OUT Jack” (Page 127)
PHONES Jack
You can connect a set of headphones to this jack.
* If headphones are connected, there will be no sound
from the speakers.
Step 4 on “Recording with the Internal Mics” (Page
40)
fig.unit03.eps
AC Adaptor Connector
Connect the dedicated AC adaptor (included) here.
“Using the Dedicated AC Adaptor” (Page 21)
Cord Hook
Use this cord hook to fasten the cord of the
dedicated AC adaptor (included) so that it doesn’t
become accidentally unplugged.
“Using the Dedicated AC Adaptor” (Page 21)
Security Slot ( )
http://www.kensington.com/
Battery Cover
“Using Batteries” (Page 23)
Battery Compartment
Install batteries here if you want to operate the
CD-2i on batteries.
If you’re using the dedicated AC adaptor, it’s not
necessary to install batteries.
“Using Batteries” (Page 23)
Switch
position
Explanation
MANUAL
The [MIC] knob will adjust the mic’s
input level.
AUTO The mic input level will be adjusted
automatically. Operating the [MIC]
knob will not affect the input level.
Rear Panel/Bottom Panel
You must turn off the power before performing the
following operations.
Switching from operation with the dedicated
AC adaptor to battery operation
Switching from battery operation to operation
with the dedicated AC adaptor
Note
CD-2i_e.book 17 ページ 2010年3月15日 月曜日 午前10時15分