Filter
Top Products
Layering Your Performance onto an SD Memory Card Song and Recording It
(continued)
63
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
7
Press the [ ](Play) button to begin recording.
When the SD memory card song you selected in Step 4- begins playing, recording
on the SD memory card will begin simultaneously. Start your performance.
fig.overdub-SD03.eps
8
Press the [ ](Stop) button to stop recording.
The recorded song will be added to the end of the SD memory card. If you want to listen
to the song you recorded, press the [ ](Play) button immediately after you stop
recording.
Lit
During recording, the upper right
of the screen will show “SD → SD.”
Remote control
●
“Key” (Page 77), “Pitch” (Page 78), and “Speed” (Page 79) settings will automatically
revert to the values of the original song only during recording. When recording ends,
these settings will return to the values you specified.
●
Sound will not be produced from the speakers while in recording-standby mode or while
recording. If you want to listen to the sound that’s being recorded, you’ll need to use
headphones. (Refer to Step 4 on Page 40.)
●
The playback level (“SD/CD Level”) setting is common to the CD and the SD memory
card. When you turn off the power, this setting will return to “0.”
●
If you decide to stop recording midway through the track, press the [ ](Stop) button.
Important
CD-2i_e.book 63 ページ ２０１０年３月１５日 月曜日 午前１０時１５分