Filter
Top Products
Preparing a CD
(continued)
29
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
1
Press the [EJECT( )] button.
After the CD has been ejected, pull it all the way out.
fig.CD04.eps
fig.finalize-mssg01.eps
If the CD-R/RW disc has not been finalized, a message
will ask “Finalize Are You Sure?” If you don’t want to
finalize the disc for playing on other CD players, press the
[EXIT] button and remove the disc after it’s been ejected.
For details on finalizing, refer to “Making a CD-R/RW Disc for Playback on Another CD
Player (Finalize)” (Page 102).
Removing a CD
If the screen shows “Finalize Are You Sure?”
Finalize
Response
Yes
Press the [ENTER] button.
The CD-RW disc will be finalized and then ejected.
No
Press the [EXIT] button.
The CD-R/RW disc will be ejected.
If pressing the [EJECT ] button does not eject the disc, you can use the emergency
eject hole to forcibly eject the CD.
* Before using the emergency eject hole to eject the CD, you must turn off the power of the CD-2i.
1 Turn off the power (☞ Page 21).
2 Insert a thin wire (such as a straightened
paper clip) into the emergency eject hole.
Insert and remove the wire repeatedly until the CD
comes out.
If You are Unable to Eject the Disc
Emergency eject hole
CD-2i_e.book 29 ページ ２０１０年３月１５日 月曜日 午前１０時１５分