Filter
Top Products
22
Turning the Power On and Off
(continued)
This device is set so its power will automatically be turned off after no operation has been
performed for a certain length of time. This is called the Auto Power-off function. If you
want to disable this function, you can do so as follows.
1
Press the [MENU] button to access the menu screen, and choose “Auto
Power-off.”
fig.menu-automarker01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Auto Power
off”
Press the [ENTER] button to confirm your choice.
2
Use the [+] [-] buttons to change the value for the Auto Power-off
function.
fig.menu-automarker01-e.eps
3
Press the [EXIT] button twice.
You are returned to the audio source screen.
About the Auto Power-off function
Value
Explanation
Off
The power will not turn off automatically. Use the [POWER] switch
to turn the power on/off.
5 min
Power will automatically turn off when the specified time has
elapsed following the last operation.
10 min
15 min
30 min
60 min
90 min
120 min (Factory Setting)
CD-2i_e.book 22 ページ ２０１０年３月１５日 月曜日 午前１０時１５分