Filter
Top Products
126
Connecting External Speakers
You can connect external speakers with built -in amplifier to the LINE OUT jack and use them
to listen to playback from the CD-2i or the sound received at its inputs. If you connect the LINE
OUT jack to the input jack of your digital piano, you’ll be able to listen to the sound using the
built-in speakers of your digital piano.
1
Turn off the power of the CD-2i.
* To prevent acoustic feedback, set the [MIC LEVEL] switch to the “MANUAL” position, and then
turn the [MIC] knob all the way to the left so that it’s off.
2
Minimize the volume of the external speakers (or digital piano) you’ll be
connecting, and turn off the power.
3
Connect the CD-2i’s left side panel LINE OUT jack to your external
speakers (or digital piano).
fig.connect-lineout-e.eps
4
Turn on the power of the CD-2i.
5
Turn on the power of your external speakers (or digital piano).
6
Turn the [VOLUME] knob to adjust the output level of the LINE OUT jack.
Adjust the volume of your external speakers (or digital piano).
Once the connections have been completed, turn on power to your various devices in the
order specified. By turning on devices in the wrong order, you risk causing malfunction and/
or damage to speakers and other devices. To prevent malfunction and/or damage to speakers
or other devices, always turn down the volume, and turn off the power on all devices before
making any connections.
Note
LINE OUT
L R
To the input jacks of
your external speakers
Type of plug that can
be connected
Stereo-mini type
RL
●
You can use external speakers that have a built-in amplifier.
●
If you hear acoustic feedback (a squealing sound) while using the mic, try changing the
direction of the mic, moving it away from the speakers, or lowering the volume.
Important
CD-2i_e.book 126 ページ ２０１０年３月１５日 月曜日 午前１０時１５分