Filter
Top Products
Turning the Power On and Off
(continued)
23
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
fig.battery06-e.esp
1
Turn the power off.
Disconnect all cables from the CD-2i.
2
Turn the CD-2i upside down and remove the battery cover.
* When turning the unit upside-down, get a bunch of newspapers or magazines, and place them
under the four corners or at both ends to prevent damage to the buttons and controls. You
should try to orient the unit so no buttons or controls get damaged. Also, handle with care, and
avoid dropping it.
fig.battery01-e.esp
3
Install six AA batteries.
fig.battery02-e.esp
4
Close the battery cover and turn the CD-2i right side up.
5
Press and hold the [POWER] switch
..
..
Release the switch when the screen appears in the display.
fig.power-on-battery.eps
Using Batteries
If you’re operating the CD-2i on batteries, you won’t be able to perform CD-related
operations such as recording, playing, or writing songs, etc. Nor will it be possible to
use phantom power.
Note
Batteries to use
AA alkaline batteries or Nickel-metal hydride batteries.
Battery cover
Press here and pull upward.
* Make sure that the “ ” and “ ”
are oriented correctly.
CD-2i_e.book 23 ページ ２０１０年３月１５日 月曜日 午前１０時１５分