Filter
Top Products
3 Touch c or d to select the display to
open/close automatically or manually.
Touch c to select MANUAL, and you have to
press OPEN/CLOSE to open/close the display.
Touch d to select AUTO, and the display auto-
matically opens/closes when power to this
unit is turned on.
Setting the clock
Use these instructions to set the clock.
1 Touch CLOCK ADJUST on the setup
menu.
2 Touch OFF to turn the clock display on.
ON will appear in the display instead of OFF.
Clock display is now on.
# To turn the clock displayoff, touch ON.
3 Touch c or d to select the segment of
the clock display you wish to set.
Each time you touch c or d it will select one
segment of the clock display:
HourMinute
As you select segments of the clock display
the segment selected will be highlighted.
4 Touch a or b to set the clock.
Each time you touch a it increases the se-
lected hour or minute. Each time you touch b
it decreases the selected hour or minute.
Notes
! You can match the clock to a time signal by
touching JUST.
If the minute is 0029, the minutes are
rounded down. (e.g., 10:18 becomes
10:00.)
If the minute is 3059, the minutes are
rounded up. (e.g., 10:36 becomes 11:00.)
! Even when the sources are off, the clock dis-
play appears on the display.
Selecting video on rear display
You can set the rear display to automatically
switch to the navigation image or AVG-VDP1
with the front display. Alternatively, you can
set it to remain showing the selected video
source and not change with the front display.
! The navigation image or the AVG-VDP1 can
be displayed when a Pioneer navigation
unit or a Vehicle Dynamics Processor is
connected to this unit.
! When selecting SOURCE and the selected
source is an audio source, nothing is dis-
played on rear display.
% Touch R.DISP on the setup menu to dis-
play video of the selected source on rear
display.
Touch R.DISP until the desired video setting
appears in the display.
! SOURCE Display the video of the selected
source on rear display
! NAVI Display the navigation image or
AVG-VDP1 on rear display
Other Functions
En
97
Section
20
Other Functions