Filter
Top Products
Introduction of advanced
multi-CD player operation
1
1 Functiondisplay
Shows the function names.
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch FUNCTION to display the func-
tion names.
The function names are displayed and oper-
able ones are highlighted.
# To go to the nextgroup of function names,
touch NEXT.
# To return to the previousgroup of function
names, touch PREV.
# To return to the previousdisplay, touch BACK.
# To return to the playbackdisplay, touch ESC.
Note
If you do not operate the function within about30
seconds, the display is automatically returned to
the playback display.
Repeating play
There are three repeat play ranges for the
multi-CD player: M-CD (multi-CD player re-
peat), TRACK (one-track repeat) and DISC
(disc repeat).
% Touch REPEAT on the function menu to
select the repeat range.
! M-CD Repeat all discs in the multi-CD
player
! TRACK Repeat just thecurrent track
! DISC Repeat the current disc
Notes
! If you select other discs during repeat play,
the repeat play range changes to M-CD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat playrange
changes to DISC.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range, M-CD
and DISC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Touch RANDOM on the function menu
to turn random play on.
Tracks will play in a random order within the
previously selected M-CD or DISC ranges.
# To turn random play off, touch RANDOM
again.
Scanning CDs and tracks
While you are using DISC, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using M-CD,the
beginning of the first track of each disc is
played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on this page.
Multi-CD Player
En
53
Section
11
Multi-CD Player