Filter
Top Products
Using news program interruption
When a news program is broadcast from a
PTY code news station the unit can switch
from any station to the news broadcast sta-
tion. When the news program ends, reception
of the previous program resumes.
% Press TA/NEWS button and hold to turn
on news program interruption.
Press TA/NEWS until dNEWS or N appears in
the display.
# To turn off news programinterruption, press
TA/NEWS and hold again.
# A news program can be canceledby pressing
TA/NEWS.
# You can also cancel the news program by
pressing SOURCE, BAND/ESC, a, b, c or d
while a news program is being received.
Receiving PTY alarm broadcasts
PTYalarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, ALARM appears on the display
and the volume adjusts to the TA volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
! An emergency announcement can be can-
celed by pressing TA/NEWS.
! You can also cancel an emergency an-
nouncement by pressing SOURCE or
BAND/ESC button.
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
! The tuner automatically memorizes the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displaying radio text
You can display the currently received radio
text and the three most recent radio texts.
1 Touch TEXT to display radio text.
Radio text for the currently broadcasting sta-
tion is displayed.
# You can cancel radio text display by touching
ESC or pressing BAND/ESC.
# When no radio text is received, NOTEXT is
displayed.
2 Touch or to recall the three most
recent radio texts.
Touching
or switches between the three
radio text data displays.
# If there is no radiotext data in memory the dis-
play will not change.
Storing and recalling radio text
You can store data from up to six radio text
transmissions at 16 keys.
1 Display the radio text you want to
store in memory.
Refer to Displaying radio text on this page.
2 Touch any of 16 and hold to store the
selected radio text.
The memory number will display and the se-
lected radio text will be stored in memory.
The next time you touch the same number in
the radio text display the stored text is recalled
from memory.
RDS
En
29
Section
06
RDS