Filter
Top Products
Watching the television
1
3
4
2
5
You can use this unit to control a TV tuner (e.g.
GEX-P5700TV(P)), which is sold separately.
For details concerning operation, refer to the
TV tuners operation manuals. This section
provides information on TVoperations with
this unit which differs from that described in
the TV tuners operation manual.
1 Sourceicon
Shows which source has been selected.
2 Band indicator
Shows which band the TV tuner is tuned to.
3 Presetnumber indicator
Shows which preset has been selected.
4 Channel indicator
Shows which channel the TV tuner is tuned.
5 Presetlist display
Shows the preset list.
1 Touch the source icon and then touch
TV to select the TV.
# When the source icon is not displayed,you
can display it by touching the screen.
2 Touch the screen to display the touch
panel keys.
3 Touch BAND to select a band.
Touch BAND repeatedly until the desired band
is displayed, TV1 or TV2.
4 To select a preset channel, touch a pre-
set channel on the list.
The preset channel you selected is tuned in.
# When the list of channels is not displayed,
touch LIST.
5 To perform manual tuning, briefly
touch c or d.
The channels move up or down step by step.
# You can also perform manual tuning by press-
ing c or d button.
6 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
# You can also perform seek tuning by pressing
and holding c or d button.
Note
If you do not use the touch panel keyswithin 30
seconds, they will be hidden automatically.
Storing and recalling
broadcast stations
If you touch any of the preset tuning keys
P1P12 you can easily store up to 12 broad-
cast stations for later recall with the touch of a
key.
TV tuner
En
61
Section
13
TV tuner