Filter
Top Products
Troubleshooting
Common
Symptom Cause Action (See)
Power doesnt turn on.
The unitdoesnt operate.
Leads andconnectors are incor-
rectly connected.
Confirm oncemore that allconnections are
correct.
The fuseis blown. Rectify thereason for the fuseblowing, then
replace thefuse. Be verysure to installthe
correct fusewith the samerating.
Noise andother factors are causing
the built-inmicroprocessor tooper-
ate incorrectly.
PressRESET. (Page 12)
Playback isnot possible. The disc isdirty. Clean disc.(Page104)
The loadeddisc isa type thisunit
cannot play.
Check whattype thedisc is.
Non compatiblevideo system disc
is loaded.
Change toa disccompatible to your video
system.
No soundsare heard.
The volumelevel willnot rise.
Cables arenot connected correctly. Connect thecables correctly.
The unitis performing still,slow mo-
tion or frame-by-frame playback.
There isno soundduring still, slowmotion or
frame-by-frame playback.
There isno picture. The parkingbrake cord isnot con-
nected.
Connect aparking brake cord,and applythe
parking brake.
The parkingbrake is notapplied. Connect aparking brake cord,and applythe
parking brake.
The icon
is displayed,and op-
eration isnot possible.
The operationis prohibited for the
disc.
This operationis notpossible.
The operationis notcompatible
with thediscs organization.
This operationis notpossible.
The picturestops (pauses) and
the unitcannot beoperated.
Reading ofdata hasbecome impos-
sible duringplayback.
After pressingg once, startplayback once
more.
There isno sound.
Volume levelis low.
The volumelevel islow. Adjustthe volumelevel.
The attenuatoris on. Turn theattenuator off.
There isaudio andvideo skip-
ping.
The unitis notfirmly secured. Securethe unitfirmly.
The pictureis stretched, theas-
pect isincorrect.
The aspectsetting isincorrect for
the display.
Select theappropriate settingfor your display.
(Page 88)
When theignition switch is
turned ON(or turned toACC),
the motorsounds.
The unitis confirming whethera
disc isloaded ornot.
This isa normaloperation.
Nothing isdisplayed.
The touchpanel keys cannotbe
used.
The rear viewcamera isnot con-
nected.
B-CAM isat incorrect setting.
Connect arear view camera.
PressV.ADJ toreturn tothe source display
and thenselect thecorrect settingfor B-
CAM. (Page 95)
Additional Information
En
100
Appendix