Filter
Top Products
2 Touch a to turn the dynamic range con-
trol on.
# To turn dynamic range controloff, touch b.
Using the down-mix function
Only when the multi-channel processor (e.g.,
DEQ-P6600) is connected to this unit, you can
operate this function.
The down-mix function allows you to play back
multi-channel audio in 2 channels.
1 Touch DOWN MIX on the DSP function
menu.
2 Touch c or d to select the desired level.
Touch c to select Lo/Ro. Touch d to select
Lt/Rt.
! Lo/Ro Stereo mix the originalaudio that
do not contain channel modes suchas sur-
round components.
! Lt/Rt Down mix so that the surround
components can be restored (decoded).
Using the direct control
You can override audio settings to check for ef-
fectiveness of your audio settings.
! All audio functions are locked out when the
direct control is on except VOLUME.
1 Touch DIGITL DIRECT on the DSP func-
tion menu.
2 Touch a to turn the direct control on.
# To turn direct control off, touch b.
Using the Dolby Pro Logic II
Only when the multi-channel processor (e.g.,
DEQ-P6600) is connected to this unit, you can
operate this function.
Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.
! Dolby Pro Logic II supports up to 48kHz
sampling rate stereo source and has no ef-
fect on other types of source.
1 Touch NEXT on the DSP function menu.
2 Touch DOLBY PL II.
3 Touch any of the following touch panel
keys to select the desired mode.
! MOVIE The Movie mode suitablefor
movie playback
! MUSIC The Music mode suitablefor
music playback
! MATRIX The Matrix mode for when FM
radio reception is weak
! OFF Turn Dolby Pro Logic II off
! ADJUST Adjust the Music mode
# You can operate ADJUST only when MUSIC
has been selected.
Adjusting the Music mode
You can adjust the Music mode with the fol-
lowing three controls.
! Panorama (PANORAMA) extends the front
stereo image to include the surround
speakers for an exciting wraparound ef-
fect.
! Dimension (DIMENSION) allows you to
gradually adjust the sound field either to-
wards the front or the rear.
Digital Signal Processor
En
77
Section
17
Digital Signal Processor