Filter
Top Products
Listening to a CD
1
3
4
2
5
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 53.
1 Sourceicon
Shows which source has been selected.
2 Disc number indicator
Shows the disc currently playing.
3 Track number indicator
Shows the track currently playing.
4 Playtime indicator
Shows the elapsed playing time of the cur-
rent track.
5 Disc list display
Shows the disc title list.
1 Touch the source icon and then touch
M-CD to select the multi-CD player.
# When the source icon is not displayed,you
can display it by touching the screen.
2 Touch the screen to display the touch
panel keys.
3 Touch a disc title on the list to play
back.
Operable disc titles are highlighted. If you
want to select a disc located at 7 to 12, touch
or to display 0712.
# When the disc titles of 01-06 or07-12 are not
displayed, you can display them bytouching
LIST.
# You can also sequentially select a disc by
pressing a/b button.
4 To skip back or forward to another
track, touch c or d.
Touching d skips to the start of the next track.
Touching c once skips to the start of the cur-
rent track. Touching again will skip to the pre-
vious track.
# You can also skip back or forward to another
track by pressing c or d button.
5 To perform fast forward or reverse,
keep touching c or d.
# You can also perform fast reverse/fast forward
by pressing and holding c or dbutton.
Notes
! When the multi-CD player performs the pre-
paratory operations, READY is displayed.
! If an error message such as ERROR-02is dis-
played, refer to the multi-CD player owners
manual.
! If there are nodiscs in the multi-CD playerma-
gazine, NO DISC is displayed.
! If you do not use the touch panel keyswithin
30 seconds, they will be hiddenauto-
matically.
Pausing CD playback
Pause lets you temporarily stop disc playback.
Multi-CD Player
En
51
Section
11
Multi-CD Player