Filter
Top Products
2 Touch SCAN on the function menu to
turn scan play on.
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
3 When you find the desired track (or
disc) touch SCAN again.
Note
After track or disc scanning is finished,normal
playback of the tracks will begin again.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc, up to 100 discs (with the
disc titles). (With multi-CD players sold before
the CDX-P1250 and CDX-P650, up to 24 tracks
can be stored in the playlist.)
1 Play a CD that you want to program.
Touch a or b to select the CD.
2 Touch NEXT on the function menu.
3 Touch ITS MEMO.
4 Touch c or d to select the desired
track.
5 Touch MEMORYa to store the currently
playing track in the playlist.
MEMORY is displayed and the currently play-
ing selection is added to your playlist. The dis-
play then shows track number again.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc willoverwrite the oldest
one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player will begin to play.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Touch NEXT on the function menu.
3 Touch ITS PLAY to turn ITS play on.
Playback begins of those tracks from your
playlist within the previously selected M-CD or
DISC ranges.
# If no tracks in the current range are pro-
grammed for ITS play then ITS EMPTY is dis-
played.
# To turn ITS play off, touch ITS PLAY again.
Erasing a track from your ITS
playlist
When you want to delete a track from your ITS
playlist, you can if ITS play is on.
If ITS play is already on, skip to step 2.
1 Play the CD with the track you want to
delete from your ITS playlist, and turn ITS
play on.
Refer to Playback from your ITS playlist on this
page.
Multi-CD Player
En
54
Section
11