Filter
Top Products
96
ConfigurethesettingsrelatingtotheFTPserver[FTP]
Select the [FTP] tab on the "Server" page. (+ Page 60)
The basic settings such as the FTP server address, user name and password and the setting to transmit alarm images at an
event occurrence can be configured on this tab.
[FTPserveraddress]
Enter an address or name of the FTP server to transmit
images.
The name of the FTP server is available only when selecting
"Manual" or "Auto" for the "Network" page - the [DNS] tab.
Enter up to 255 alphanumeric characters including hyphens
(-) and periods (.).
[Username]
Enter a user name (login name) to access the FTP server.
Enter up to 32 alphanumeric characters excluding (&) listed
as follows.
Note:
• Availablecharacters:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a
b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6
7 8 9 ! " # $ % ' ( ) * + , - . / :; < = > ? @ [ \ ] ^ _ ` { | } ~
[Password]
Register a password to be entered when transmitting imag-
es to the FTP server. Enter up to 32 alphanumeric characters
excluding "&" listed in the description of "Available charac-
ters". An entered character for the password will be dis-
played as "∗" or "·".
[Mode]
Select the mode to transmit images to the FTP server.
Change to "Passive" when sending images is difficult with
"Active". Change to "Passive" when sending images is diffi-
cult with "Sequencial".
■ Image transmission by alarm
[Serverdirectory]
Enter a directory of the server. Enter up to 128 alphanumeric
characters (excluding "& *: < > ? \ ~") listed in the description
of "Available characters". Enter up to 255 alphanumeric
characters excluding "& * : < > ? \ | ~ " listed in the descrip-
tion of "Available characters".
[Duration-pre]
Select the duration of the images recorded by pre-event
recording to be transmitted from the following.
Off/1 s - 10 s (in 1 second intervals)
Default: Off
Important:
• Thesettingfor"Duration-pre"istheshortestdurationto
transmit images recorded by pre-event recording. The
actual duration of the recorded images to be transmitted
will be longer than the setting.
• Imagesrecordedbypre-eventrecordingwillnotbe
transmitted when pre-event recording is not to be per-
formed. Configure the setting to perform pre-event
recording to transmit images recorded by pre-event
recording. Refer to page 80 for further information on
how to configure the settings relating to the pre-event
recording.
[Duration-post]
Select the duration of the transmitted images for the post-
event recording.
Off/1 s - 10 s (in 1 second intervals)
Default: 5 s
[Alterationdetection]
Select "On" or "Off" to determine whether or not to attach an
alteration detection code to recorded images to be transmit-
ted using the viewer software when an alarm occurs.