Filter
Top Products
106
The settings relating to the user authentication On/Off, PSD user, administrator registration and operation levels can be config-
ured on the "User mng." page. It is possible to restrict users and hosts (PCs) to access the recorder by registering the users and
hosts (PCs) who can access the recorder in advance when "On" is selected for the user authentication and the host authentica-
tion.
The "User mng" page has [Basic], [Administrator], [User], [Host] and [User level] tabs.
Configurethebasicsettingsrelatingtousermanagement[Basic]
Select the [Basic] tab on the "User mng." page. (+ Page 60)
The setting can be configured on this tab to determine whether to enable or disable the user authentication and the host authen-
tication for network operation, the settings relating to the login users who operate the recorder using the buttons on the front
cover of the recorder and the settings relating to the users who operate the recorder using the PS·Data compatible controllers.
Configurethesettingsrelatingtotheusermanagement[Usermng.]
■ Network
Determine whether to enable or disable the user authentica-
tion and the host authentication when operating the recorder
using a PC via a network.
[Userauthentication]
Select "On" or "Off" to determine whether or not to authenti-
cate the user.
[Hostauthentication]
Select "On" or "Off" to determine whether or not to authenti-
cate the host.
■ Front panel
Configure the settings to enable the auto login function that
starts the recorder automatically when the power of the
recorder is turned on.
[Autologinuser]
When "On" is selected for "Auto login", the user registered
as auto login user in this setting can log into the recorder
automatically. An auto login user should be one of the users
registered in the recorder.
Default: ADMIN
[Autologin]
Select "On" or "Off" to determine whether to activate or
deactivate the auto login function.
Off: Does not log in to the recorder automatically. Login
is required when operating the recorder from the
logout status.
On: Logs in to the recorder automatically
Default: On
[Autologout]
Configure the settings to log out a user automatically when
the set time has passed from the time a user logged in.
Off/1 min/2 min/3 min/4 min/5 min/30 min:
Default: Off
Note:
• When"On"isselectedfor"Autologin",theuserwillnot
be logged out automatically even if "1 min", "2 min",
"3 min", "4 min", "5 min" or "30 min" is selected for
"Auto logout".
• Topreventinappropriateoperations,itisrecommended
to select "On".
[Quicklogin]
Select "On" or "Off" to determine whether to enter or select
the user name .
Off: Enters a user name.
On: Selects a user name.
Default: On