Filter
Top Products
90
Configure the settings relating to the sequential display on a PC monitor
[Network]
Select the [Network] tab on the "Display" page. (+ Page 60)
The settings for the sequential display when displaying images on a monitor of a PC connected to this recorder via a network can
be configured on this tab.
[Themethodofsequence]
Select the desired sequential display pattern from the follow-
ing.
1-screen: Displays images with the sequential display
on a 1-split screen.
4-screen: Displays images with the sequential display
on a 4-split screen.
Default: 1-screen
[1-screenlivesequence]
Configure the settings for the sequential display when dis-
playing images with the sequential display on a 1-split
screen.
When the [Setup] button is selected, the following setup
page will be displayed to configure each setting item.
• [Cam.]
Select a camera image (---, Cam.1 - Cam.16) to be dis-
played at each step. When "---" is selected, the step will
be skipped.
• [Presetposition]
Select a camera preset position (---, 1 to 256). When
"---" is selected, the camera does not move to any pre-
set position.
• [Dwelltime]
Select an interval time to go to the next sequential step.
2s/3s/5s/10s/20s
• [Back]button
Closes the setup page for 1-screen live sequence and
returns to the [Network] tab.