Panasonic WJ-HD616K CD Player User Manual


  Open as PDF
of 156
 
120
[Recordinginformation]
When the [Display] button is selected, the "Recording infor-
mation" page will be displayed, and the disk capacity and
the available capacity of each hard disk drive, the hour meter
and the time range of the images recorded on each hard
disk drive will be displayed.
There are 2 setup pages. To move to another page, select
the [<] or [>] button.
Note:
• Informationisdisplayedon"HDD1"intheRAID5or
RAID6 mode.
[Main]button/[Ext.1]-[Ext.3]buttons
Select a button to determine the disk (the recorder (main)/
extension unit) of which recording information is to be dis-
played.
• Capacity
Displays the capacity of the hard disk drive.
• Remaincapacity
Displays the remaining capacity of the hard disk drive.
Note:
• Thedisplayedremainingcapacitywillnotincludethe
space required for data management. Therefore, the
understated remaining capacity will be displayed.
Therefore, the understated remaining capacity will be
displayed.
• Thecapacityremainingforthepre-eventrecordingarea
is not shown.
• Hourmeter
Displays the operating time of the hard disk drive.
• Recordedtimerange
The time range of the images recorded will be displayed.
Note:
• Thetimerangeoftheimagesforthepre-eventrecording
area is not displayed.
• [Back]button
Closes the "Recording information" page and returns to
the [Disk information] tab.
[Totalcapacity]
Displays the total capacity of all recording areas and opera-
tion modes (single mode/RAID5 mode/RAID6 mode) of hard
disk drives.
• [NMLrec.]
Displays the total capacity of manual recording areas
and schedule recording areas.
• [EVTrec.]
Displays the total capacity of emergency recording areas
and post-event recording areas.
• [Pre-EVTrec.]
Displays the total capacity of pre-event recording areas.
• [Undefined]
Displays the total capacity of the spaces not assigned to
any recording areas.
Note:
• Operationmodesofharddiskdrivesaredisplayedsepa-
rately on the web browser.
[Diskinformation]
Displays the capacity of the hard disk drives on the recorder
or the extension units and the recording area type.
Normal: Set for the normal recording area
Event: Set for the event recording area
Pre-event: Set for the pre-event recording area
Remove: Hard disk drives that are excluded from oper-
ation due to fault
Error: Hard disk drives that have become faulty during
the format process
N-Used: Set for the normal recording area of another
HD616K / HD716K (Recording is impossible, but
playback is possible.)
E-Used: Set for the event recording area of another
HD616K / HD716K (Recording is impossible, but
playback is possible.)
P-Used: Set for the pre-event recording area of another
HD616K / HD716K (Recording is impossible, but
playback is possible.)
* "(R)" indicates the hard disk drives that are designated to
the subject for recording.
 previous next