Filter
Top Products
24
User/Hostmanagement
It is necessary to register users who operates the recorder and hosts (PC) that accesses the recorder via a network such as a
LAN. Up to 32 users and up to 8 hosts can be registered.
The following information can be registered as user information and host information.
Item Description Remarks
User name User name is to be registered to log in to the recorder.
It will be required to log in to the recorder.
This setting item can be configured only in
the user registration.
IP address IP address of a PC is to be registered to access the
recorder. When "On" is set for "Host registration", only
PCs with the registered IP addresses can access the
recorder.
This setting item can be configured only in
the host registration.
Password Password is to be registered to log in to the recorder
together with the user name. It will be required to log in
to the recorder.
This setting item can be configured only in
the user registration.
Level Level indicates availability of the functions for users.
Refer to page 112 for the operable functions for each
level.
Priority level Priority level indicates the operational priority. When
multiple users/hosts tried to operate the same, only a
user/host with a higher priority can operate.
In the following cases, the operational right
will be given to a user/host with a higher
priority.
• Whenanotherusertriedtologinwhile
the other user is already being logged
in.
• Whenanotherusertriedtocontrola
camera that is being controlled by the
other user
Default screen Camera channels from which live images are to be
displayed on Monitor 1, Monitor 2 and the PC monitor
just after the login can be determined.
Camera partitioning Operational range of each camera channel for users/
hosts can be determined.
Users and hosts will be handled differently depending on how to access the recorder (between when the recorder is directly
operated and when the recorder is operated via a network).
When operating the recorder directly
Operate the recorder while monitoring the monitor connected to the recorder. There are 3 ways of how to operate the recorder
directly.
• Operateusingthebuttonsonthefrontcoveroftherecorder.
• Operateusingamouseconnectedtothefrontcoveroftherecorder.
• OperatefromaPS·Datacompatiblesystemcontroller.
Note:
• WhencontrollingacameraconnectedtoacoaxialcommunicationunitfromasystemcontrollercompatiblewithPS·Data,the
priority level configured on the recorder will not be applied since it is controlled directly from the system controller. (The priority
will be given to the latest operation.)
It is impossible to log in to the recorder from the front cover (using the buttons or the mouse) and from the system controller at
the same time (except logging in using the same user name).It is impossible to log in to the recorder regardless of the priority
level even if a user tried to log in when another user is already logged in.