Filter
Top Products
105
Configurethesettingsrelatingtonetworktransmission[Transmission]
Select the [Transmission] tab on the "Network" page. (+ Page 60)
The settings relating to the resolution and rate to transmit live images to a PC via a network can also be configured on this tab.
[Livevideoresolution]
Select the resolution for live images from the following.
REC resolution: Live images are transmitted with the
resolution applied at the time of recording.
QVGA: Live images are transmitted in the QVGA size.
Default: REC resolution:
[Livevideorate(recresolution)]
Select the image transmission rate of live images (activated
when recording is not performed) when "REC resolution" is
selected for "Live video resolution". During recording, record-
ing rate is activated for live image transmission.
Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips (Only for
HD716K)
Default: 7.5ips
[Livevideoquality(recresolution)]
Select the image quality of live images (activated when
recording is not performed) when "REC resolution" is select-
ed for "Live video resolution". During recording, recording
image quality is activated for live image transmission.
XF(ExtraFine): Extra quality
SF (Super Fine): Super high quality
FQ (Fine): High quality
NQ (Normal): Standard quality
EX(Extended): Low quality (for long recording)
Default: FQ
[Livevideorate(QVGA)]
Select the transmission bit rate when "QVGA" is selected for
"Live video resolution".
128Kbps/192Kbps/256Kbps/384Kbps*/512Kbps*
* Only for HD716K
Default: 256Kbps
[Bandwidthcontrol]
Select the maximum transmission rate for data to be trans-
mitted from the following.
Unlimited/512Kbps/1 024Kbps/2Mbps/3Mbps/5Mbps/
8Mbps
Default: Unlimited
Note:
• Regardlessofthesettingfor"Livevideoresolution",
when images are displayed on a multiscreen (4-split/
9-split/16-split screen) or with the sequential display,
"QVGA" is activated for resolution, and the setting for
"Live video rate (QVGA)" is activated when image is
transmitted.
• Whenimageisdisplayedonasinglescreen,thesetting
for "Live video resolution" is activated when image is
transmitted.
• Thesettingsfor"Livevideorate(recresolution)","Live
video quality(rec resolution)" and "Live video rate(QVGA)"
are applied to each screen segment.
Example: When "128Kbps" is selected for "Live video
rate (QVGA)" while images are being displayed on a
4-split screen, the whole transmission rate is
512 Kbps.
• Selectthesettingfor"Bandwidthcontrol"sothatthe
value is greater than the total rate required for network
transmission. When the setting value is less than the
total transmission rate, image data may be destroyed
during transmission.
Example: When "QVGA" is selected for "Live video res-
olution" and "128Kbps" is selected for "Live video
rate (QVGA)" while 4 PCs displaying a single screen
are accessing the recorder simultaneously, select the
value greater than "512Kbps" for "Bandwidth con-
trol".
When "REC resolution" is selected for "Live video resolu-
tion", it is recommended to set "Unlimited" for
"Bandwidth control" to prevent the images from destruc-
tion due to change in transmission rate caused by the
recording setting. When images are destroyed even
when "Unlimited" is selected for "Bandwidth control",
select a lower value for image quality or recording rate.