Panasonic WJ-HD616K CD Player User Manual


  Open as PDF
of 156
 
149
Symptom Checkitem/Remedy Ref. Page
Cannot control the camera.
• Istheuserlevelofthecurrentloginuserallowedtocontrolthe
camera?
Check the settings.
108
• Isthe"BUSY"indicationdisplayedontheoperationpanel?
When the "BUSY" indication is displayed on the operation
panel, a user with higher priority is controlling the camera.
Operating
Instructions
(PDF)
Alarm operations are not
activated.
• AresignalscorrectlysuppliedtotheALARM/CONTROLcon-
nector and the ALARM connector at the rear?
44, 48
• IstheALARMconnectorconfiguredcorrectly?
48
• Isthealarmoperationalmodesetto"ALM"?
Check the settings.
72, 73, 74, 75
• Checkifthealarmsuspensionisactivated.
Reset the alarm suspension.
Operating
Instructions
(PDF)
The"VIDEOLOSS"indica-
tion is displayed.
• Arethecamerasconnectedcorrectly?
Check the camera connection.
29
• Whenthecameraconnectioniscorrect,contactyourdealer
since it may be possible that is caused by the cable discon-
nection or the camera malfunction.
–
The"THERMAL"indication
is displayed.
• Therangeofambientoperatingtemperatureisbetween
+5 °C and +45 °C {+41 °F - +113 °F}. However, the
"THERMAL" indication will be displayed when the recorder
detected the ambient temperature in excess of +40 °C
{+104 °F}. When the "THERMAL" indication is displayed,
reconsider the installation place to protect the hard disk drives
or take measures to keep the ambient temperature between
+20 °C - +30 °C {+68 °F - +86 °F}. When the "THERMAL"
indication is displayed frequently, contact your dealer.
12
The clock loses time.
• Isthebuilt-inbatterychargedenough?
Operate the recorder for 48 hours or more to charge the built-
in battery.
12
• Isthebuilt-inbatterywornout?
The built-in battery life is approx. 5 years as an indication of
replacement. (The built-in battery life may become shorter
depending on the use condition.)
12
Theextensionunitisnotrec-
ognized (even when con-
nectingtheextensionunit).
• Makesurethattheconnectioncableprovidedwiththeexten-
sion unit is being used.
33
• Makesurethattheconnectioncableisnotloose.
33
 previous next