Filter
Top Products
RQT8926
78
Operating iPod with this unit
By inserting Universal Dock for iPod (SH-PD10, not included) into the OPTION port on the back of this unit, you can charge and
play or record tracks from a connected iPod. Also make sure to read the operating instructions for SH-PD10.
∫ Connecting the SH-PD10 (not included)
Before connecting, turn off the power to iPod.
1 Insert SH-PD10 into the OPTION port on the back of this unit.
2 Connect iPod to the SH-PD10.
Once connected, recharging begins (➜ below). Refer to page 79 for information about recording and play.
∫ About recharging the battery
By inserting SH-PD10 (not included) to the OPTION port on the back of this unit and connecting iPod, you can recharge iPod.
Once connected, the battery will begin to recharge automatically.
iPod will start recharging regardless of whether this unit is on or off.
Check iPod to see if the battery is fully recharged.
[Note]
≥Tracks from this unit cannot be transferred to iPod using SH-PD10.
≥If you are not using iPod for an extended period of time after recharging has completed, disconnect it from SH-PD10, as the
battery will be depleted naturally. (Once fully recharged, additional recharging will not occur.)
For more information, refer to the operating instructions for iPod or SH-PD10.
≥You can enjoy higher audio quality when audio tracks from iPod are output through this unit’s speakers.
≥You can perform basic functions on iPod with this unit’s remote control.
≥You can record tracks from iPod to this unit’s HDD.
≥You can recharge iPod.
OPTION
DC OUT 5V
500mA MAX
RL
XM
SPEAKERS
AC IN
DIGITAL
OPTICAL
OUT
IN(TV)AV OUT
AM
ANT
LAN
LOOP ANT GND
COMPONENT
VIDEO OUT
SUB-
WOOFER
(4 )
CENTER
FRONT
(8 )
(8 )
VIDEO
OUT
R
Y
L
R
L
P
R
P
B
(10BASE-T/
100BASE-TX)
TV IN
AUX
EXT
LOOP
TRANSMITTER
DIGITAL
V.1
FM
ANT
75
1
2
Main unit
iPod
(not included)
SH-PD10
(not included)
Do not connect or
disconnect SH-PD10
while the main unit
is on.
PTX79P.book Page 78 Monday, April 9, 2007 9:24 AM