Filter
Top Products
RQT8926
22
You can operate the television through the unit’s remote control.
Point the remote control at the television
While pressing [Í TV], enter the code with the
numbered buttons.
e.g., “0250”: [0] ➜ [2] ➜ [5] ➜ [0]
Manufacturer and Code No.
Test by turning on the television ([Í TV]).
Repeat the procedure until you find the code that allows
correct operation.
≥If your television brand is not listed or if the code listed for
your television does not allow control of your television, this
remote control is not compatible with your television.
Change the remote control code on the main unit and the
remote control (the two must match) if you place other
Panasonic products close together.
Use “Mode 1”, the factory set code, under normal
circumstances.
Preparation
1 To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
2Press [Í].
1 While stopped
Press [SETUP].
2 Press [34] to select “Other Setup” and press
[ENTER].
3 Press [34] to select “Remote Control” and press
[1].
4 Press [34] to select “Remote Control” and press
[ENTER].
5 Press [34] to select the mode (“Mode 1” or “Mode
2”) and press [ENTER].
6 To change the code on the remote control
While pressing [ENTER], press and hold the
numbered button ([1] or [2]) for more than 5 seconds.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
∫ When the following indicator and display
appears on the unit’s display and the TV.
Change the code on the remote control to match the main
unit’s (➜ step 6).
Optional connections and settings
Television operation
Panasonic
National
QUASAR
0051/0250 PHILIPS (RC-5) 0054
RCA 0047
SAMSUNG 0060/0587/
0702
FISHER 0154 SANYO 0154
GE 0047 SHARP 0093/0165
GOLDSTAR 0178/
0317/0457
SONY 0000
HITACHI 0145 SYLVANIA 0054
JVC 0053 THOMSON 0047
LG 0178/
0317/0457
TOSHIBA 0156
MAGNAVOX 0054 ZENITH 0017
MITSUBISHI 0150
Operating the television
[Í TV] (Turn the television on/off)
[TV/VIDEO] (Change the television
’s video input mode
)
[r s VOLUME] (Adjust the television volume)
ޓ
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
O
N
E
T
O
U
C
H
P
L
A
Y
S
T
A
R
T
ޓ
ޓ
ޓ
T
O
P
M
E
N
U
HDD
BAND
FUNCTIONS
MENU PLAYLIST
SELECT
VOLUME
FAVORITE
PLAYMODE
HDDREC
ENERGETIC RELAXINGMELLOW
MUTINGSETUP
SELECT
SOUND
SLEEP
FL DISPLAY
VS
2
ND
EMOTIONAL
REG
SELECT
PLAYPAU SESTOP
CH SELECT
CANCEL
SETUP
CH SELECT
CANCEL
When other Panasonic equipment is
located nearby
Setup for Video
Other Setup
DVD
VIDEO
HDMI
DISPLAY
Remote Control
Clock / Timer
TV Audio Input
Power On/Off
Network
Maintenance
Setup
ENTER
Main screen
Remote Control
Mode1
Mode2
ENTER
Cancel
Please set your remoto control to Mode2.
Setting
the
Date
and
Time
DISC SFC
TG
D.MIX
MONO
SLP
ST
CT
MODE
AC
PRG
RDS
DTS
PL
A
PS
T
Y
H.BASS
2
SRD
PGM
HDCD
E.
1
RND
D
V
D
W
D
The unit’s remote
control code
PTX79P.book Page 22 Monday, April 9, 2007 9:24 AM