Filter
Top Products
RQT8926
29
1 Lights when disc is ready to use.
2 Lights when the unit outputs progressive video signal.
3 Program playback indicator (➜ page 57)
4 T: Title number/Track number
G: Group number
5 Random playback indicator (➜ page 54, 57)
6 D.MIX indicator
When off: Down-mixing is possible.
When lit: The disc prevents down-mixing so only the two
front channels can be played.
7 SLEEP indicator (➜ page 86)
8 Radio broadcast display (➜ page 62)
ST: Stereo
MONO: Monaural
9 C: Content number
T: Track number
: Dolby Digital indicator
Lights when Dolby Digital decoder is being used.
; DTS indicator
Lights when DTS decoder is being used.
< Timer setting indicator (➜ page 85)
Lights when the scheduled timer recording is set.
= Dolby Pro Logic II indicator (➜ page 83)
> Recording indicator (➜ page 34)
? Dolby Virtual Speaker indicator (➜ page 83)
@ Multiroom indicator (➜ page 80)
A Main display section/Progress indicator (➜ below)
B Equalizer indicator (➜ page 82)
C Repeat play indicator (➜ page 54
, 58
)
D H.BASS indicator (➜ page 82)
≥Indicators on the front display for functions that this unit does not support will not light.
∫ Progress indicator
The progress of the following operations:
–importing MP3/WMA to the HDD
–conversion and analysis of data on the HDD
–compression of data on the HDD
–division/combination of LPCM tracks
–back-up of data from the HDD
–restoring of data to the HDD
is indicated on the unit's display as shown on the right:
Press [<OPEN/CLOSE] on the main unit to open the tray and
insert a disc. (Press the button again to close the tray.)
≥It is not possible to play continuously from one side of a
double sided disc to the other. You will need to eject the disc
and turn it over.
≥[RAM] Remove the disc from its cartridge before use.
The precision parts in this unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke can also cause the unit to break or
malfunction.
Clean this unit with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Do not use commercially available lens cleaners as they
may cause malfunction. Cleaning of the lens is generally not
necessary although this depends on the operating
environment.
[Note]
Do not obstruct the rear panel’s internal cooling fan.
The unit’s display
PRG
PRG
PRG PGM
PGM
PGM
TG
TG
TG
RND
RND
RND
D.MIX
D.MIX
D.MIX
SLP
SLP
SLP
MONO
MONO
MONO
ST
CT
CT
STCT
DDTS
DDTS
DDTS
SFC
SFC
SFC
SFC
W1
W1
W1
REC
REC
REC
EQ H.BASS
EQ H.BASS
EQ H.BASS VS
VS
VS
USBUSB
SDSD
RDSRDS
W2W2
WS
WS
WS
WS
12.5% completed
25% completed
37.5% completed
50% completed
100% completed
How to insert the disc
Insert label-up.
Unit care
Before moving the unit, ensure the disc trays are
empty. Failure to do so will risk severely damaging the
discs and the unit.
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the unit.
Read Me First
Getting Started
PTX79P.book Page 29 Monday, April 9, 2007 9:24 AM