Filter
Top Products
RQT8926
65
1 Press [TUNER/BAND]
§1
to select “XM”.
2 Press [6 5] to select the channel.
∫ Selecting XM channels by direct entry
1 Press [TUNER/BAND]
§1
to select “XM”.
2 Press [XM DIRECT TUNING].
3 Press the numbered buttons to select the XM channel.
To select a 2-digit or 3-digit number
e.g.,“12”: [S10] ➜ [1] ➜ [2]
“125”: [S10] ➜ [S10] ➜ [1] ➜ [2] ➜ [5].
XM channels are organized into categories such as Rock,
Classical, Country and Dance to make browsing and selecting
channels easier.
1 Press [TUNER/BAND]
§1
to select “XM”.
2 Press [34] to enter category tune mode.
The category of the current XM channel flashes on the
display.
3 While the category is flashing
Press [34] to select a category.
Available categories vary according to broadcasting
hours.
≥Press and hold [34] to scan through quickly.
4 While the selected category is flashing
Press [
21]
to select a channel in the current
category.
The XM channel number is displayed.
5 Press [ENTER] to exit category tune mode.
The XM channel information will be displayed.
∫ Making selections with the on-screen
display
Preparation
To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
1 Press [TUNER/BAND]
§1
to select “XM”.
2 Press [TOP MENU].
3Press [34] to select “Category Selection” and press
[ENTER].
4Press [34] to select the category and press [ENTER].
5Press [34] to select the channel and press [ENTER].
[Note]
Some XM channels belong to two categories; a primary and
secondary category, either of which can be used for XM
channel selection. Although you may have selected an XM
channel from its secondary category (e.g., DANCE), after
exiting and then re-entering category tune mode, the primary
category of the XM channel is displayed (e.g., DECADES).
Channel presets allow you to quickly and conveniently select
your favorite XM channels. Up to 30 XM channels can be
stored as channel presets.
Preparation
To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
1 While listening to the XM radio broadcast
Press [SUB MENU].
2 Press [34] to select “Set Preset Channel” and press
[ENTER].
3 Press [34] to select the channel and press [ENTER].
≥An XM channel previously stored is overwritten when
another XM channel is stored in the same channel
preset.
≥XM channel 0 (RADIO ID) cannot be stored as a
channel preset.
To return to the previous screen
Press [RETURN].
Manual tuning
Selecting XM channels by category
DISC SFC
TG
D.MIX
MONO
SLP
ST
CT
MODE
AC
PRG
RDS
DTS
PL
A
PS
PTY
H.BASS
2
SRD
PGM
HDCD
E.
1
RND
CD
DVD
W
D
Setting preset XM channels
The radio
Basic Operations
PTX79P.book Page 65 Monday, April 9, 2007 9:24 AM