Filter
Top Products
RQT8926
25
≥It may not be possible to play the discs in all cases due to the
type of discs, the condition of the recording, the recording
method and how the files were created (➜ below, Tips for
making data discs).
§1
This unit can play CD-R/RW recorded with CD-DA or Video
CD format.
[WMA] [MP3] [JPEG] This unit also plays HighMAT discs.
§2
Discs recorded on DVD recorders or DVD video cameras,
etc. using Version 1.1 of the Video Recording Format (a
unified video recording standard).
§3
Discs recorded on DVD recorders or DVD video cameras
using Version 1.2 of the Video Recording Format (a unified
video recording standard).
§4
Discs recorded on DVD recorders or DVD video cameras
using DVD-Video Format.
§5
Recorded using a format different from DVD-Video Format,
therefore some functions cannot be used.
§6
A process that allows play on compatible equipment. To
play a disc that is displayed as “Necessary”, the disc must
first be finalized on the device it was recorded on.
§7
Closing the session will also work.
∫ Tips for making data discs
≥If groups were created away from the root like “002 group” in
the illustration below, the eighth one onwards is displayed on
the same vertical line in the menu screen.
≥There may be differences in the display order on the menu
screen and PC screen.
≥This unit cannot play files recorded using packet write.
≥This unit is not compatible with ID3 tags.
Naming folders and files (Files are
treated as contents and folders are
treated as groups on this unit.)
At the time of recording, prefix folder
and file names. This should be with
numbers that have an equal number of
digits, and should be done in the order
you want to play them (this may not
work at times).
DVD-RAM
≥Discs must conform to UDF 2.0.
DVD-R/RW
≥Discs must conform to UDF bridge (UDF 1.02/ISO9660).
≥This unit is not compatible with multi-session. The default
session only is played.
CD-R/RW
≥Discs must conform to ISO9660 level 1 or 2 (except for
extended formats).
≥This unit is compatible with multi-session but if there are a lot
of sessions it takes more time for play to start. Keep the
number of sessions to a minimum to avoid this.
∫ Discs that cannot be played
Blu-ray, HD DVD, AVCHD discs, Version 1.0 of DVD-RW, DVD-
ROM, CD-ROM, CDV, CD-G, SACD, DivX Video Discs, Photo
CD, DVD-RAM that cannot be removed from their cartridges,
2.6-GB and 5.2-GB DVD-RAM, PAL discs
§
and “Chaoji VCD”
available on the market including CVD, DVCD and SVCD that
do not conform to IEC62107.
§
You can play DVD-Audio; however, still pictures may be
displayed enlarged.
Format Disc Extension Reference
[WMA] CD-R/RW “.WMA”
“.wma”
≥Compatible compression rate: between 48 kbps and 320 kbps
≥You cannot play WMA files that are copy protected.
≥This unit is not compatible with Multiple Bit Rate (MBR: a file that contains the same
content encoded at several different bit rates).
[MP3] DVD-RAM
DVD-R/RW
CD-R/RW
“.MP3”
“.mp3”
≥Sampling frequency and compatible compression rate
DVD-RAM, DVD-R/RW
:
11.02, 12, 22.05, 24 kHz (8–160 kbps)
44.1, 48 kHz (32–320 kbps)
CD-R/RW : 8, 11.02, 12, 16, 22.05, 24 kHz (8–160 kbps)
32, 44.1, 48 kHz (32–320 kbps)
[JPEG] DVD-RAM
DVD-R/RW
CD-R/RW
“.JPG”
“.jpg”
“.JPEG”
“.jpeg”
≥JPEG files taken on a digital camera that conforms to DCF Standard Version 1.0
are displayed.
–Files that have been altered, edited or saved with picture editing software may not
be displayed.
≥This unit cannot display moving pictures, MOTION JPEG and other such formats,
still pictures other than JPEG (e.g., TIFF) or play pictures with attached audio.
002 group
001
001 group
001 track.mp3
002 track.mp3
003 track.mp3
003 group
001 track.mp3
002 track.mp3
003 track.mp3
001 track.mp
3
002 track.mp
3
003 track.mp
3
004 track.mp
3
e.g., [MP3]
root
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so play may not be possible.
Regarding DVD-Audio
Some multi-channel DVD-Audio will prevent down-mixing
(➜ page 108, Glossary) of all or part of their contents if this
is the manufacturer’s intention. When playing such discs, or
such parts of the disc, unless the number of connected
speakers is the same as the disc’s channel specification,
audio will not be output properly (e.g., part of the audio is
missing, multi-channel audio cannot be selected and audio
is played in two channels). Refer to the disc’s jacket for more
information.
Read Me First
Getting Started
PTX79P.book Page 25 Monday, April 9, 2007 9:24 AM