Filter
Top Products
Chapter 4 Settings — [POSITION] menu
76 - ENGLISH
Setting [CORNER CORRECTION]
1) Press as to select [GEOMETRY].
2) Press qw to select [CORNER CORRECTION].
3) Press the <ENTER> button.
f The [GEOMETRY:CORNER CORRECTION] screen is displayed.
4) Press as to select the item to adjust, and press the <ENTER> button.
5) Press asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT]
[UPPER RIGHT] [LOWER LEFT] [LOWER RIGHT]
[LINEARITY]
Horizontal direction
Vertical direction
Note
f The menu or logo may run off the screen when [GEOMETRY] is set.
f If [EDGE BLENDING] (x page 79) adjustment and [GEOMETRY] are used together, correct edge blending adjustment may not be
possible in certain environments.