Filter
Top Products
Chapter 6 Appendix — Technical information
158 - ENGLISH
Channel Control details Performance Parameter Remark
8 Fade-in time setting
0.0s 0-15
Operate together with channel 1.
0.5s 16-31
1.0s 32-47
1.5s 48-63
2.0s 64-79
2.5s 80-95
3.0s 96-111
3.5s 112-127
4.0s 128-143
5.0s 144-159
7.0s 160-175
10.0s 176-191
No operation 192-255 ―
9 Fade-out time setting
0.0s 0-15
Operate together with channel 1.
0.5s 16-31
1.0s 32-47
1.5s 48-63
2.0s 64-79
2.5s 80-95
3.0s 96-111
3.5s 112-127
4.0s 128-143
5.0s 144-159
7.0s 160-175
10.0s 176-191
No operation 192-255 ―
10 No operation ― ― ―
11 Geometric adjustment
OFF 0-15
―
KEYSTONE 16-31
CURVED 32-47
No operation 48-95
CORNER CORRECTION 96-111
No operation 112-255
Note
f If the projector is operated with the remote control or on the control panel, or by the control command while controlling the projector using
the Art-Net function, the setting of the DMX controller and the computer application may be different from the projector status. To reect the
controls of all channels to the projector in that case, set “Lock” of channel 7 to “Operation not available” and then set back to “Operation
available”.
Control commands via LAN
When web control administrator rights password is set (Protect mode)
Connecting
1) Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a
connection to the projector.
f You can obtain both the IP address and the port number from the menu screen of the projector.
IP address
Obtain from the main menu → [NETWORK] → [NETWORK STATUS]
Port number
Obtain from the main menu → [NETWORK] → [NETWORK CONTROL] → [COMMAND PORT]
2) Check the response from the projector.