Filter
Top Products
Chapter 4 Settings — [NETWORK] menu
128 - ENGLISH
Item Description
[AIR FILTER]
There is too much dust accumulated in the air lter unit. Turn the <MAIN POWER>
switch <OFF> (x page 50), and clean the air lter. (x page 143)
r [WARNING] items
Item Description
[AC POWER]
AC input voltage is weak. Use electric wiring that can sufciently withstand the power
consumption of the projector.
[LOW-TEMPERATURE]
The temperature around the optics module inside the projector is low. Projection cannot
be started until the optics module becomes warm.
[HORIZONTAL TILT]
The projector is used tilted at an angle that exceeds 15° from the horizontal plane. Using
the projector in such a condition may shorten the life of the components or result in
malfunctions.
[NOT SUPPORTED LAMP]
The lamp unit for portrait mode is attached. Replace the lamp unit to that for the
projector.
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
[Access error log] page
Click [Status] → [Access error log].
The error log on the web server is displayed such as access to the pages that do not exist or access with unauthorized user names or
passwords.