Panasonic PT-DS20KU Home Theater System User Manual


 
Specications
ENGLISH - 173
Appendix
Model No. PT-DZ21KU PT-DS20KU PT-DW17KU
Contrast ratio 10 000:1 (when [DYNAMIC IRIS] is set to [3])
Terminals
<RGB 1 IN>
terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC x 1))
[RGB signal] 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative
polarity compatible
VD TTL high impedance, automatic positive/negative polarity
compatible
[YP
B
P
R
signal]
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p]
75 Ω
[Y/C signal] Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
<RGB 2 IN>
terminal
1 set, high-density D-Sub 15p (female)
[RGB signal] 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative
polarity compatible
VD TTL high impedance, automatic positive/negative polarity
compatible
[YP
B
P
R
signal]
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p]
75 Ω
<VIDEO IN>
terminal
1 set, BNC 1.0 V [p-p] 75 Ω
<DVI-D IN>
terminal
1 set, DVI-D 24 p single link, DVI 1.0 compatible, HDCP compliant
<HDMI IN>
terminal
1 set, HDMI 19 pin, (HDCP and Deep color compatible)
<SDI IN 1>
terminal
1 set (BNC)
[SD-SDI signal] SMPTE ST 259 compliant
[HD-SDI signal] SMPTE ST 292 compliant
[3G-SDI signal] SMPTE ST 424 compliant
[Dual link HD-SDI (LINK-A)
signal]
SMPTE ST 372 compliant
<SDI IN 2>
terminal
1 set (BNC)
[SD-SDI signal] SMPTE ST 259 compliant
[HD-SDI signal] SMPTE ST 292 compliant
[Dual link HD-SDI (LINK-B)
signal]
SMPTE ST 372 compliant
<3D SYNC 1 IN/
OUT> terminal
1 set (BNC)
During input setting TTL high impedance
During output setting TTL output max. 10 mA
<3D SYNC 2 OUT>
terminal
1 set (BNC)
TTL output max. 10mA
<SERIAL IN>/
<SERIAL OUT>
terminal
D-Sub 9 p, each set, RS-232C compatible, for computer control
<REMOTE 1 IN>/
<REMOTE 1 OUT>
terminal
M3 stereo mini jack, each set, remote control for serial control
<REMOTE 2 IN>
terminal
1 set D-Sub 9 p for contact control
<LAN> terminal 1 set, (for RJ-45 network connection, PJLink compatible, 10Base-T/100Base-TX)
Power cable length 3.0 m (118-1/8")
Outer case Molded plastic