Filter
Top Products
[NETWORK] menu
132 - ENGLISH
Settings
■
[Basic control] page
Click [Projector control] → [Basic control].
(1)
(2)
(4)
(5)
(3)
(1) [POWER]
Switches the power on/off.
(2) [SHUTTER]
Switches between use or not use of the shutter
function.
(3) [OSD]
Switches between on (display)/off (no display) of the
on-screen display function.
(4) [SYSTEM]
Switches the system method.
(5) [INPUT SELECT]
Switches the input signal.
■
[Detail control] page
Click [Projector control] → [Detail control].
(7)
(8)
(9)
(10)
(2)
(1)
(3)
(4)
(5)
(6)
(1) Control of the projector
The projector is controlled by clicking the buttons in
the same way as the buttons on the remote control.
(2) [SUB MEMORY]
Switches the sub memory.
(3) [SYSTEM DAYLIGHT VIEW]
Switches to system daylight view settings.
(4) [FREEZE]
Temporarily pauses the image.
(5) [P IN P]
Switches the P IN P setting.
(6) [LEFT/RIGHT SWAP] (PT-DZ21KU and
PT-DS20KU only)
Switches the ip horizontal settings.
(7) [WAVEFORM MONITOR]
Displays the waveform of the input signal.
(8) [LENS]
Adjusts the projection lens.
(9) [TEST PATTERN]
Displays the test pattern.
(10) [GET OSD]
Updates the on-screen display of the projector at the
right of the control page.