Filter
Top Products
[NETWORK] menu
136 - ENGLISH
Settings
■
[E-mail set up] page (continued)
(3)
(2)
(1)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail
addresses are to be used.
Leave it blank when two E-mail addresses are not to
be used.
(2) Settings of the conditions to send E-mail
Select the conditions to send E-mail to the second
E-mail address.
[MAIL CONTENTS]:
Select either [NORMAL] or [SIMPLE].
[ERROR]:
An E-mail message is sent when an error
occurred in the self-diagnosis.
[LAMP1 RUNTIME]:
An E-mail message is sent when the remaining
lamp on time for the lamp 1 has reached the
value set at the right eld.
[LAMP2 RUNTIME]:
An E-mail message is sent when the remaining
lamp on time for the lamp 2 has reached the
value set at the right eld.
[LAMP3 RUNTIME]:
An E-mail message is sent when the remaining
lamp on time for the lamp 3 has reached the
value set at the right eld.
[LAMP4 RUNTIME]:
An E-mail message is sent when the remaining
lamp on time for the lamp 4 has reached the
value set at the right eld.
[INTAKE AIR TEMPERATURE]:
An E-mail message is sent when the air intake
temperature has reached the value set at the
above eld.
[PERIODIC REPORT]:
Place a check mark on this when E-mail is to be
sent periodically.
It will be sent on the days and time with the check
mark.
(3) [Submit]
Update the settings.
Note
z
Set each item of [LAMP1 RUNTIME] to [LAMP4 RUNTIME] to 500 hours or less when using the optional
accessory replacement lamp unit (for portrait mode) (Model No.: ET-LAD510P (1 pc), ET-LAD510PF (4 pcs)).