Onkyo TX-SA706 Stereo Receiver User Manual


 
83
Advanced Setup—Continued
You can change various audio settings by pressing the
[AUDIO] button.
Note:
When the “Audio TV Out” setting is set to “On”
(page 93), the [AUDIO] button is disabled.
The Audio Adjust settings are explained below.
Tone Control Settings
You can adjust the bass and treble for the front speakers,
except when the Direct, Pure Audio, or THX listening
mode is selected.
Bass
You can boost or cut low-frequency sounds output by the
front speakers from –10 dB to +10 dB in 2 dB steps.
Treble
You can boost or cut high-frequency sounds output by
the front speakers from –10 dB to +10 dB in 2 dB steps.
Notes:
This setting is not available when the multichannel
DVD input is selected.
This procedure can also be performed on the AV
receiver/AV amplifier by using its [TONE], [–], and
[+] buttons (see page 55).
Late Night Function
Late Night
With the Late Night function, you can reduce the
dynamic range of Dolby Digital material so that you can
still hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when you
don’t want to disturb anyone.
For Dolby Digital and Dolby Digital Plus sources, the
options are:
For Dolby TrueHD sources, the options are:
Notes:
The effect of the Late Night function depends on the
material that you are playing and the intention of the
original sound designer, and with some material there
will be little or no effect when you select the different
options.
On the TX-SA706, this procedure can also be per-
formed on the AV amplifier by using its [LATE
NIGHT] button.
Re-EQ Function
With the Re-EQ function, you can compensate a
soundtrack whose high-frequency content is too harsh,
making it more suitable for home theater viewing.
Re-EQ
This function can be used with the following listening
modes:
Dolby Digital, Dolby Digital EX, Dolby Pro Logic II
Movie, Dolby Pro Logic IIx Movie
DTS, DTS-ES, DTS Neo:6 Cinema, DTS 96/24
Multichannel
Re-EQ (THX)
This function can be used with the following listening
modes:
THX Cinema, THX Surround EX, THX Select2 Cin-
ema
Notes:
Settings of “On” and “Off” for the Re-EQ function are
kept in each listening mode. However, in THX listen-
ing mode, when the AV receiver/AV amplifier is
turned off, it will return to “On”.
On the TX-SA706, this procedure can also be performed
on the AV amplifier by using its [Re-EQ] button.
Adjust Using the AUDIO Button
1
Remote
controller
Press the [RECEIVER] button fol-
lowed by the [AUDIO] button.
The setting item appears on the display.
2
Use the Up and Down [ ]/[ ] but-
tons to select an item.
3
Use the Left and Right [ ]/[ ]
buttons to change the setting.
Repeat this step for the other settings.
Off: Late Night function off (default).
Low: Small reduction in dynamic range.
High: Large reduction in dynamic range.
Auto: The Late Night function is set to “On” or
“Off” automatically (default).
Off: Late Night function off.
On: Late Night function on.
Off: Re-EQ Function off.
On: Re-EQ Function on.