Filter
Top Products
42
First Time Setup—Continued
HDMI Input Setup
If you connect a video component to HDMI IN, you
must assign that input to an input selector. For example,
if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
If you’ve connected your TV to the AV receiver/AV
amplifier with an HDMI cable, you can set the AV
receiver/AV amplifier so that composite video, S-Video,
and component video sources are upconverted* and out-
put by the HDMI OUT. You can set this for each input
selector by selecting the “- - - - -” option.
Notes:
• For composite video, S-Video, and component video
upconversion for the HDMI OUT, the HDMI Input
setting must be set to “- - - - -”. See page 23 for more
information on video signal flow and upconversion.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See “Digital Input Setup” on page 44.
• On the TX-SR706, the TUNER input selector cannot
be assigned and is fixed at the “- - - - -” option.
• This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
Video Input Setup
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select “1. Input Assign”,
and then press [ENTER].
The “Input Assign” menu appears.
IN
OUT
Composite video, S-Video,
component video
Composite video, S-Video,
component video
HDMI
HDMI
1. Input Assign
1. HDMI Input
2. Component Video Input
3. Digital Audio Input
3
Use the Up and Down [ ]/[ ] but-
tons to select “1. HDMI Input”,
and then press [ENTER].
The “HDMI Input” menu appears.
4
Use the Up and Down [ ]/[ ] but-
tons to select an input selector,
and use the Left and Right [ ]/
[ ] buttons to select:
HDMI1, HDMI2, HDMI3, HDMI4:
Select the HDMI IN to which
the video component has
been connected.
-----: Output composite video,
S-Video, and component
video sources from the HDMI
OUT. The video output signal
from the HDMI OUT is the
one configured in “Compo-
nent Video Setup” (see
page 43).
Each HDMI IN cannot be assigned to
more than one input selector. When
HDMI1 - HDMI4 have already been
assigned (as shown in the Step 3 illus-
tration), you must set first any unused
input selectors to “- - - - -” or you will
be unable to assign HDMI1 - HDMI4
to input selector.
5
Press the [SETUP] button.
The setup menu closes.
1–1. HDMI Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
TUNER
CD
PHONO
HDMI1
HDMI2
HDMI3
HDMI4
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -