Onkyo TX-SA706 Stereo Receiver User Manual


 
81
Advanced Setup—Continued
Here you can set listening mode-related settings and
functions.
Note:
This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
Multiplex/Mono Settings
Multiplex
Input Ch
This setting determines which channel is output from a
stereo multiplex source. Use it to select audio channels
or languages with multiplex sources, multilingual TV
broadcasts, and so on.
Mono
Input Ch
This setting specifies the channel to be used for playing
any 2-channel digital source such as Dolby Digital, or 2-
channel analog/PCM source in the Mono listening
mode.
Output Speaker
This setting determines which speakers output mono
audio when the Mono listening mode is selected.
PLIIx/Neo:6 Music Mode Settings
PLIIx Music (2ch Input)
These settings provide for playing any 2-channel digital
source such as Dolby Digital, or 2-channel analog/PCM
source in the Dolby PLIIx Music listening mode.
Panorama
With this function, you can broaden the width of the
front stereo image when using the Dolby Pro Logic II
Music or Dolby Pro Logic IIx Music listening mode.
Audio Adjust Functions
1
Remote
controller
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [ ]/[ ] but-
tons to select “3. Audio Adjust”,
and then press [ENTER].
The “Audio Adjust” menu appears.
3
Use the Up and Down [ ]/[ ] but-
tons to select the functions, and
then press [ENTER].
The function menu you selected
appears.
4
Use the Up and Down [ ]/[ ] but-
tons to select the settings, and
use the Left and Right [ ]/[ ]
buttons to set them.
The settings are explained below.
3. Audio Adjust
1. Multiplex / Mono
2. PLIIx / Neo:6
3. Dolby EX
4. Theater-Dimentional
5. DSD
6. LFE Level
5
When you’ve finished, press the
[SETUP] button.
The setup menu closes.
Main: The main channel is output (default).
Sub: The sub channel is output.
Main/Sub: Both the main and sub channels are output.
Left + Right: Both the left and right channels are out-
put (default).
Left: Only the left channel is output.
Right: Only the right channel is output.
Left / Right: Mono audio is output by the front left
and right speakers.
Center: Mono audio is output by the center
speaker (default).
On: Panorama function on.
Off: Panorama function off (default).