Onkyo TX-SA706 Stereo Receiver User Manual


 
10
Front & Rear Panels—Continued
For detailed information, see the pages in parentheses.
Speaker/channel indicators (73)
Indicate the speaker configuration and channels
used by the current input source.
:
A box is displayed for each speaker that’s set in the
Speaker Configuration. No box appears for speakers
that are set to “No” or “None”.
The following abbreviations indicate which audio
channels are included in the current input signal.
ZONE 2 indicator (99)
Lights up when Powered Zone 2 is being used.
Listening mode and format indicators (62)
Show the selected listening mode and audio input
signal format.
Tuning indicators (TX-SR706 only) (57)
RDS (not North American model) (59):
Lights up when tuned to a radio station that supports
RDS (Radio Data System).
AUTO (57):
Lights up when Auto Tuning mode is selected for
AM or FM radio. Goes off when Manual Tuning
mode is selected.
TUNED (57):
Lights up when tuned to a radio station.
FM STEREO (57):
Lights up when tuned to a stereo FM station.
SLEEP indicator (56)
Lights up when the Sleep function has been set.
Audyssey indicator (49, 78)
Flashes during automatic speaker setup. Lights up
when the “Equalizer Settings” is set to “Audyssey”.
Headphone indicator (56)
Lights up when a pair of headphones are plugged
into the PHONES jack.
Message area
Displays various information.
Audio input indicators
Indicate the type of audio input that’s selected as the
audio source: HDMI, ANALOG, or DIGITAL.
Volume level (54)
Displays the volume level.
MUTING indicator (56)
Flashes while the AV receiver/AV amplifier is
muted.
Display
1
67
8
9
bk
bl
23 4
5
FL: Front left
C: Center
FR: Front right
SL: Surround left
LFE: Subwoofer (Low Frequency Effects)
SR: Surround right
SBL: Surround back left
SB: Surround back
SBR: Surround back right