Onkyo TX-NR747 Stereo Receiver User Manual


 
Advanced Settings (Setup Menu)
En-45
Video Select
Setting Item Default Value Setting Details
Video Select Last
Select the video input played along with
audio output when either "TUNER", "NET" or
"BLUETOOTH" is selected.
This setting is effective only for an input
selector which is assigned in "HDMI Input" or
"Video Input".
"Last": Select the video input played immediately
prior.
"BD/DVD", "CBL/SAT", "STRM BOX", "PC",
"GAME", "AUX", "CD", "PHONO", "TV": Play the
video from the selected input.
The setting cannot be changed when input other than "TUNER", "NET" or "BLUETOOTH" is selected.
When input is "NET" or "BLUETOOTH", switch between displaying and not displaying video by
pressing MODE on the remote controller.
5� Listening Mode Preset
You can preset your favorite listening mode to each input. (For example, you can always
apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged
sound field.)
When the list of input sources is displayed, set the signal type and listening mode.
Although it is possible to select the listening mode during playback, the selected mode will
be reset when the unit enters standby mode.
Setting Item Default Value Setting Details
Analog/PCM Last Valid Set the listening mode for playing PCM signals
of CD and analog signals of record and cassette
tape.
Mono/Multiplex Last Valid Set the listening mode for playing Dolby Digital
and other digital signals recorded in monaural or
multiplex audio.
2 ch Source Last Valid Set the listening mode for playing Dolby Digital
and other digital signals recorded in 2 channels.
Dolby D/Dolby D+/
TrueHD
Last Valid Set the listening mode for playing Dolby Digital,
Dolby Digital Plus and Dolby TrueHD signals.
Setting Item Default Value Setting Details
DTS/DTS-ES/
DTS-HD
Last Valid Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats. Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio
source.
Other Multich Source Last Valid Set the listening mode for playing DSD signals
of DVD-Audio and Super Audio CD that are input
from HDMI IN jack.
Available listening modes vary depending on the input signal.
Setting "Last Valid" will always select the last selected mode.
Only "Analog" can be set to the "TUNER" input.
"Digital" and "TrueHD" can be set to the "NET" input.
Only "Digital" can be set to the "BLUETOOTH" input.