Filter
Top Products
Advanced Settings (Setup Menu)
En-43
Theater-Dimensional
Make the settings for Theater-Dimensional listening mode.
Setting Item Default Value Setting Details
Listening Angle Wide
To enhance the effect of Theater-Dimensional,
select the actual angle of the left and right
front speakers as it appears from the listening
position.
"Narrow": Less than 30°
"Wide": Greater than 30°
● Position the front speakers 20° to the listening position if you have selected "Narrow" in "Listening
Angle" and 40° if you have selected "Wide".
LFE Level
Set the low-frequency effect (LFE) level of the Dolby Digital, DTS, Multichannel PCM and
DSD (Super Audio CD) signals.
Setting item Default Value Setting Details
Dolby D/Dolby D+/
TrueHD
0dB Select the low-frequency effect (LFE) level of
low-frequency effect sound is too strong, select
DTS/DTS-ES/DTS-
HD
0dB Select the low-frequency effect (LFE) level of
low-frequency effect sound is too strong, select
● This setting works on LFE channel volume of
DTS, DTS-ES, DTS-HD High Resolution and
DTS-HD Master Audio sources.
Other Multich Source 0dB Select the low-frequency effect (LFE) level of
low-frequency effect sound is too strong, select
● This setting works on LFE channel volume
of Multichannel PCM and DSD (Super Audio
CD) sources.
Volume
Make the detailed volume setting of the unit.
Setting Item Default Value Setting Details
Volume Display Absolute Switch the volume display between the absolute
value and relative value. The absolute value 82 is
equivalent to the relative value 0dB.
"Absolute": Absolute value such as "1" to "99"
"Relative(THX)": Relative value such as "-81dB"
and "+18dB"
● If the absolute value is set to 82, "82Ref" will
appear on the display and the "THX" indicator
will flash.
Muting Level Set the volume lowered from the listening volume
when muting is on.
(in 10dB increments)
Maximum Volume Off
Set the maximum value to avoid too high volume.
Select a value from "Off", "50" to "99".
Power On Volume Last
Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level
before entering standby mode), "Min", "1" to "99"
and "Max".
● You cannot set a higher value than that of
"Maximum Volume".
Headphone Level 0 dB Adjust the output level of the headphones.
Select a value between "-12 dB" and "+12 dB".
4� Source
Make settings for input sources, such as volume difference adjustments for each input
selector for the connected equipment. Select the input selector to configure.
IntelliVolume
Setting Item Default Value Setting Details
IntelliVolume 0 dB
Adjust the volume level difference between the
devices connected to the unit. Select a value
between "-12 dB" and "+12 dB". Set a negative
value if the volume of the target device is larger
than the others and a positive value if smaller.
When you select a desired input to check the
audio, start playback of the connected device.
● This function is not effective in Zone 2.