Filter
Top Products
Reference Information
En-69
Reference Information
Linked Operation with CEC-compatible
Components
Link operation with a product conforming to the CEC of the
HDMI standard.
Note that linked operation is not always guaranteed with all
CEC devices.
Operation has been confirmed on the following devices (as of
February 2015)�
TV (Random order):
● Toshiba TV sets
● Sharp TV sets
Players/Recorders (Random order):
● Onkyo and Integra RIHD-compatible players
● Toshiba players and recorders
● Sharp players and recorders (only when used together with
Sharp TV sets)
Caution: For linking functions to work properly, do not connect more
RIHD-compatible components than the quantities specified below,
to the HDMI jacks. Linking functions are not guaranteed when more
RIHD-compatible components than the below mentioned quantities
are connected. Furthermore, do not connect the AV receiver to
another AV receiver/AV amplifier via HDMI.
● Blu-ray Disc/DVD players: up to 3.
● Blu-ray Disc/DVD recorders: up to 3.
● Cable TV tuner, terrestrial digital tuner, and satellite broadcasting
tuner: up to 4 units.
Checking whether the HDMI Linked Operation
Settings Are Enabled
1. Turn on the power of all connected components.
2. Turn off the power of the TV, and confirm that the power
of the connected components is turned off automatically
with the link operation.
3. Turn on the power of the Blu-ray Disc/DVD player/
recorder.
4. Start playback on the Blu-ray Disc/DVD player/recorder,
and verify the following:
● The AV receiver automatically turns on, and selects
the input to which the Blu-ray Disc/DVD player/
recorder is connected.
● The TV automatically turns on, and selects the input
to which the AV receiver is connected.
5. Following the instruction manual of the TV, select "Use
the TV speakers" from the menu screen of the TV, and
confirm that the audio is output from the speakers of
the TV, and not from the speakers connected to the AV
receiver.
6. Select "Use the speakers connected from the AV
receiver" from the menu screen of the TV, and confirm
that the audio is output from the speakers connected to
the AV receiver, and not from the TV speakers.
Caution:
● Even if you set to output audio on the TV speakers, audio will
be output from the speakers connected to the AV receiver when
you adjust the volume or switch the input on the AV receiver.
To output audio from the TV speakers, redo the corresponding
operations on the TV.
● In case of an RIHD connection with RI and RI EX audio control
compatible components, do not connect the RI cable at the
same time.
● On the TV, when you select anything other than the HDMI
jack to which the AV receiver is connected, the input on the AV
receiver will be switched to "TV".
● The AV receiver will automatically power on in conjunction
when it determines it to be necessary. Even if the AV receiver
is connected to an RIHD compatible TV or player/recorder, it
will not power on if it is not necessary. It may not power on in
conjunction when the TV is set to output audio from the TV.
● Linked system functions with the AV receiver may not work
depending on the component model connected. In such cases,
operate the AV receiver directly.
● When the player/recorder cannot be operated with the remote
controller of the AV receiver, the corresponding component may
not be programmed to support the remote controller operation of
CEC. Program the remote control code of the component maker
to the remote controller for using.
About HDMI
HDMI (High-Definition Multimedia Interface) is a digital
interface standard for connecting TVs, projectors, Blu-
ray Disc/DVD players, set-top boxes, and other video
components. Until now, several separate video and audio
cables have been required to connect AV components.
With HDMI, a single cable can carry control signals, digital
video and digital audio (2-channel PCM, multichannel
digital audio, and multichannel PCM).
The HDMI video stream (i.e., video signal) is compatible
with DVI (Digital Visual Interface) (*1), so TVs and displays
with a DVI input can be connected by using an HDMI-to-
DVI adapter cable. (This may not work with some TVs and
displays, resulting in no picture.)
This unit supports HDCP (High-bandwidth Digital Content
Protection) (*2), so it can display picture only on HDCP-
compatible components.
HDMI of the unit supports the following functions.
Audio Return Channel, 3D, x.v.Color, Deep Color, LipSync,
4K (Passthrough)
Audio Formats Supported by The Unit:
● 2-channel linear PCM (32 - 192 kHz, 16/20/24 bit)
● Multichannel linear PCM (up to 7.1 ch, 32 - 192 kHz,
16/20/24 bit)
● Bitstream (Dolby Atmos, Dolby Digital, Dolby Digital
Plus, Dolby TrueHD, DTS, DTS-HD High Resolution
Audio, DTS-HD Master Audio)
● DSD
Your Blu-ray Disc/DVD player must also support HDMI
output of the above audio formats.
About Copyright Protection:
The unit supports Revision 1.4 and Revision 2.2 (HDMI
OUT MAIN/SUB and HDMI IN1 to 3 only) of the HDCP
(High-bandwidth Digital Content Protection) (*2), a copy-
protection system for digital video signals. Other devices
connected to the unit must also support HDCP.
*1 DVI (Digital Visual Interface): The digital display interface standard set
by the DDWG (*3) in 1999.
*2 HDCP (High-bandwidth Digital Content Protection): The video
encryption technology developed by Intel for HDMI/DVI. It is designed
to protect video content and requires a HDCP-compatible HDMI/DVI
receiver to display the encrypted video.
*3
DDWG (Digital Display Working Group): Lead by Intel, Compaq, Fujitsu,
Hewlett Packard, IBM, NEC, and Silicon Image, this open industry
group's objective is to address the industry's requirements for a digital
connectivity specification for high-performance PC and digital displays.