Filter
Top Products
Advanced Settings (Setup Menu)
En-34
Advanced Settings (Setup Menu)
How to Set
The unit allows you to configure advanced settings in order
to provide even better experience.
● Operation: You can set up by viewing the guidance
displayed on the TV screen (OSD). Select the item with the
cursor buttons of the remote controller and press ENTER
to confirm your selection. To return to the previous screen,
press RETURN.
¼ Operation
1. Press RECEIVER on the remote controller.
● Always press RECEIVER first to change the remote
controller to RECEIVER mode (the mode to operate
this unit) since its mode may be changed to operate
another component.
2. Press SETUP to display the Setup menu.
3. Press / to select the desired menu, and then press
ENTER.
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Listening Mode Preset
6. Hardware
7. Remote Controller
8. Miscellaneous
Setup
1. TV Out
2.HDMI Input
3. Video Input
4. Digital Audio Input
4. Press / to select the item, and then press ENTER.
5. With the / / / cursors, select the item to configure
the settings.
HDMI Out
OSD Language
Impose OSD
Screen Saver
MAIN
English
On
3 minutes
1-1. TV Out
To exit the setup menu, press SETUP.
Overview of the Setup menu
1� Input/Output Assign
Make settings to assign the various jacks and for the on-
screen display function on the TV when you use the setting
menu, for example.
2� Speaker
Make advanced settings for the speakers.
3� Audio Adjust
Make a variety of settings related to sound.
4� Source
Make settings for input sources, such as volume difference
adjustments for each input selector for the connected
equipment.
5� Listening Mode Preset
You can preset your favorite listening mode.
6� Hardware
Make a variety of settings such as for linked operation
with connected HDMI equipment, the standby mode and
network connection for this unit.
7� Remote Controller
Make settings related to the remote controller.
8� Miscellaneous
Update the firmware and perform initial settings, etc.