Filter
Top Products
74
Listening to the Radio—Continued
Positioning the SiriusConnect Home
antenna
You can check the strength of the SIRIUS Satellite Radio
signal and adjust the position of the SiriusConnect Home
antenna accordingly.
Notes:
• So long as the signal strength is good, you can enjoy
SIRIUS Satellite Radio by using either satellite or ter-
restrial reception.
• Terrestrial signals are only available in certain areas.
• The SIRIUS information is only displayed when the
SAT Radio Mode is set to “SIRIUS” or “XM/SIRIUS”
(see page 67).
• If you’re using both XM Satellite Radio and SIRIUS
Satellite Radio and the SAT Radio Mode is set to
“XM/SIRIUS” (see page 67), signal strength meters
for both systems appear on the same screen.
1
Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ] but-
tons to select “7. Hardware
Setup”, and then press [Enter].
The “Hardware Setup” menu appears.
Receiver
Enter
Setup
7. Hardware Setup
1. Remote Control
2. Zone2
3. Tuner
4. Analog Multich
5. HDMI
6. Network
3
Use the Up and Down [ ]/[ ] but-
tons to select “3. Tuner”, and
then press [Enter].
The “Tuner” screen appears.
4
Use the Up and Down [ ]/[ ] but-
tons to select “Antenna Aiming”,
and then press [Enter].
The “Antenna Aiming” screen appears.
Note:
If the SAT Radio Mode is set to “None”
(see page 67), the “Antenna Aiming”
item is not available.
5
Position the SiriusConnect Home
antenna so that as many bars as
possible (up to 3) appear on the
SIRIUS Satellite signal strength
meter.
If you cannot receive a satellite signal,
position the SiriusConnect Home
antenna so that as many bars as possible
(up to 3) appear on the SIRIUS Terres-
trial signal strength meter.
7–3. Tuner
SAT Radio Mode
Antenna Aiming
SURIUS Parental Lock
SIRIUS
Satellite Terrestrial
SIRIUS ID
SIRIUS Antenna Aiming
- - - - - - - - - - - -
7–3. Tuner