62
Listening to the Radio—Continued
■ Category Search Mode
■ Direct Tuning
You can select an XM radio channel directly by entering
its number.
Selecting Channels on the AV receiver:
1
Remote
controller
Press the [Tuner] button, and
then press the [Enter] button
repeatedly to select Category
Search mode.
This procedure can also be performed
on the AV receiver by using its [Tuner]
button, and [Tuning Mode] button.
2
Use the Left and Right [ ]/[ ]
buttons to select a category, and
use the Up and Down [ ]/[ ] but-
tons to select a channel in that
category.
1
Remote
controller
Press the [Tuner] button, fol-
lowed by the [D.TUN] button.
2
Within 8 seconds, use the num-
ber buttons to enter the channel
number.
For example, to select channel #20,
press 0, 2, 0, or 2, 0, [Enter].
Note:
While the [Tuner] button is flashing,
you cannot select another input source
with the remote controller.
1
AV receiver
Press the [Tuning Mode] button
repeatedly to select Channel
Search mode or Category Search
mode.
2
AV receiver
Press [Enter] repeatedly to select
a category.
3
AV receiver
Use the Tuning Up and Down [ ]/
[ ] buttons to select a channel.
In Channel Search mode, you can
select any channel.
In Category Search mode, you can only
select channels from the currently
selected category.
Display
Return
EnterMemory
Tuning
PresetTuning Mode
Return
CH +
/
–
Enter