Filter
Top Products
23
Connecting the AV Receiver—Continued
■ “Monitor Out” Setting Set to “Analog”
With the “Monitor Out” setting set to “Analog”
(see page 40), video input signals flow through
the AV receiver as shown, with composite video
and S-Video sources being upconverted for the
component video output. Use this setting if you
connect the AV receiver’s COMPONENT
VIDEO MONITOR OUT to your TV.
Composite video is upconverted to S-Video and
S-Video is downconverted to composite video.
Note that these conversions only apply to the
MONITOR OUT V and S outputs, not the
VCR/DVR OUT V and S outputs.
The composite video, S-Video, and component
video outputs pass through their respective input
signals as they are.
This signal flow also applies when the “Output Res-
olution” setting is set to “Through” (see page 109).
Video Signal Flow and the Resolution Setting
When the “Monitor Out” setting is set to “Ana-
log” (see page 40), if the “Output Resolution”
setting is set to anything other than “Through”
(see page 109), the video signal flow will be as
shown here, with composite video and S-Video
sources being upconverted for the component
video output.
The composite video, S-Video, and component
video outputs pass through their respective ana-
log input signals as they are. HDMI input signals
are not output.
Audio Connection Formats
Audio equipment can be connected to the AV
receiver by using any of the following audio con-
nection formats: analog, optical, coaxial, analog
multichannel, or HDMI.
When choosing a connection format, bear in
mind that the AV receiver does not convert digital
input signals for analog line outputs and vice
versa. For example, audio signals connected to
an optical or coaxial digital input are not output
by the analog TAPE OUT.
If signals are present at more than one input, the inputs will be selected automatically in the following order of priority:
HDMI, digital, analog (including multichannel). You can specify which audio inputs the AV receiver checks for the
presence of a signal in the “Automatic Audio Input Selection Setup” on page 113.
IN
MONITOR OUT
DVD player, etc.
AV receiver
TV, projector, etc.
Composite
Composite
S-Video
S-Video
Component
Component
Video Signal Flow Chart
(Output Resolution: Through)
HDMI
HDMI
IN
MONITOR OUT
DVD player, etc.
AV receiver
TV, projector, etc.
Composite
Composite
S-Video
S-Video
Component
Component
Video Signal Flow Chart
(Output Resolution: Auto, 480p
(480/576p), 720p, 1080i, 1080p)
HDMI
HDMI
IN
OUT
DVD player, etc.
AV receiver
MD recorder, etc.
HDMICoaxial Analog
Audio Signal Flow Chart
Multichannel
Analog
Optical
*1 Depends on the “Audio TV Out” setting
(see page 110).
*2 Only the front L/R channels are output.
(There will be no down mix.)
Coaxial
Optical Coaxial HDMI